|
|
|
01-01-2014, 11:43 AM | #1 |
Major
175
Rep 1,491
Posts |
Offset questions for fender clearance
Okay, is 17x7.5 et 38 going to be the same distance to the fender as 17x8 et40?
Question is I'm lowered and I bought 17x7.5 et38 wheels and went with BFG rivals in 225/45/17. Note these run a little wider then PSS. And I'm lowered on H&R sport springs with m sport stuts. Will I need negative camber? Or roll fenders? It's either I buy m3 control arms and pull the pin out or I buy brakes for my 128i, I'm trying to figure this out. |
01-01-2014, 12:47 PM | #2 |
Lieutenant Colonel
84
Rep 1,623
Posts
Drives: Alpine White 128i Cabrio
Join Date: Jun 2013
Location: Toronto, Ontario, Canada
|
It will be 0.9 cm or 9mm closer to the fender I think.
__________________
2008 128i E88 / Alpine White / Boston Leather Sport / 6AT / M3 Paddle Shifters / Bilstein B8 / H&R Springs / Dinan Fixed Camber Plates / BMW 335i Front Brakes / PIAA Xtreme White 4150K Angel Eyes / Rear Fogs Enabled / Cyba Air Scoops / Euro Airbox / BMW Performance Exhaust / Stubby BMW Antenna
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|