|
|
|
02-22-2016, 03:33 AM | #727 | |
Private
5
Rep 57
Posts |
Quote:
Did we find out the make off these alloys must admitt they look stunning better than anything other 1m replica wheel I have seen ?! |
|
Appreciate
0
|
02-22-2016, 04:19 AM | #728 | ||
Colonel
1299
Rep 2,093
Posts
Drives: '11 135i M Sport
Join Date: Dec 2013
Location: Delmarva Peninsula
|
Quote:
__________________
|
||
Appreciate
0
|
02-22-2016, 05:05 AM | #729 |
Private
5
Rep 57
Posts |
Okay thanks you will check them out.
anyone else running these Alazor on the 1 series ? believe they are known as the Alazor 359, just need to find out if they do them in 18" and if so what fitments ? Last edited by Jono400; 02-22-2016 at 09:58 AM.. |
Appreciate
0
|
02-26-2016, 03:40 PM | #730 |
New Member
3
Rep 12
Posts |
I know I could probably find this by searching, but I was hoping to get a quick answer as I am looking at a 135i right now.
I currently have VMR V810 wheels on my e92 and was hoping to transfer them over, will they fit? Worried about the offsets. 19x8.5 et35, Michelin PSS 235/35 19x9.5 et40, Michelin PSS 265/30 Thank You! Last edited by Formula1; 02-26-2016 at 04:21 PM.. |
Appreciate
0
|
02-27-2016, 03:51 PM | #731 |
Colonel
1418
Rep 2,560
Posts
Drives: Rapidly from A to B
Join Date: Jun 2005
Location: Chicago 'burbs or TN Smokies
|
Front 255/35-18 on 18x8.5 ET 42 (ET 45 + 3 mm spacer).
Rear 255/35-18 on 18x8.5 ET 45. Direzza Z2SS. No rub, no fender pull, no fender roll Dinan camber plates at -1.5 camber BMWP springs |
Appreciate
0
|
03-04-2016, 12:06 PM | #732 |
Major
180
Rep 1,310
Posts |
Hey guys I really need your help i want to get a set of custom BCforged wheels
18x8.5 front and 18x9.5 rear what would be the best Offset for the front and rear rims for the widest tire I can run with Advan Neova 08R I have KW clubsport with KW camber plates
__________________
MHD Custom Flash (E85) [Jake@MOTIV] / Vargas Stage 2 Turbos / Fuel it LPFP Stage 3+/ Moitiv Port Injection/ MMP Turbo Inlets/ 3.5 Tmap Sensor / ER FMIC /ER Chargepipe HKS-BOV / AA Downpipes / Agency Power Race mid pipes / Berk Technology race exhaust / BMW SSK / BC Forged Whees Toyo R888 tires / KW Club sport coilovers+KW Camber Plates / Spec stg2+Spec SMSFW/ APR Wing GTC200
|
Appreciate
0
|
03-08-2016, 08:58 PM | #733 |
Captain
214
Rep 988
Posts |
TC Kline SA coilovers with Dinan camber plates on stock top hats
In Front: 18x8.5" ET45+5mm spacer so ET40 245/35/18 MPSS Rolled and pulled fenders all around. 4-5mm clearance from front perch, lots of room fender side. I would have more strut clearance with a shorter top hat setup and is why I'm considering an adjustable camber plate in the future. Out back 18x9.5" ET45(I think) 255/35/18 MPSS. Works.
__________________
MHD | BMS | VRSF | APEX | RECARO | TC Kline | BERK | Turner Motorsport | Eibach | BMW Performance
|
Appreciate
0
|
03-12-2016, 08:11 AM | #735 |
Private
13
Rep 71
Posts |
Wheels: OZ Ultraleggera
Front: 18 x 8 ET 40mm Spacer: None Rear: 18 x 9 ET 40mm Spacer: None Tires:- Factory offset sizes Front: MPSS 215/40R18 Rear: MPSS 245/35R18 Suspension/Fender Mods/Camber: Factory upgraded M sport suspension (very tired at this point) Orignal M-sport (15mm) Notes: Rear rubs on compression (large wallows in road or bumps). No issue with fronts. Could be related to suspension being worn out and needing replacement. Only rubbing sides of tires so a light rear fender roll would likely correct. You can see the rub marks on the rear tires in this photo- look at around 7 O'clock
__________________
2017 Alpine White M2 DCT- Stock ... for now
2010 135i Sport with flipper paddles. Cobb Pro tuned by Kozmic Motorsports- "slightly modified" |
Appreciate
0
|
03-14-2016, 04:02 PM | #737 |
Lieutenant
183
Rep 537
Posts |
17" fitting
I have some E85 wheels that are 17x8 ET47 with 245/40/17's on them. I'm going with koni yellows and H&R sport springs, dinan camber plates. So I'd be looking at about -2 camber? Will this setup work or will I need some rolling or M3 front arms to get more camber?
|
Appreciate
0
|
03-15-2016, 02:22 PM | #738 |
Lieutenant
458
Rep 590
Posts |
Wheels: HRE FF15
Front: (18x8.5) (ET40) Spacer: none Rear: (18x9) (ET44) Spacer: none Tires:Michelin Piolt Super Sport Front: 225/40/18 Rear 255/35/18 ST Coil Over Notes: Slight rubbing under hard cornering or uneven surfaces
__________________
2018 MG F80 M3 ZCP | BBS LM?s | Michelin Pilot 4s | BMW HAS Coil Overs | Stek PPF | DINAN CF Intakes | IND Engine cover | Akrapovic Evolution Exhaust |
2018 Champaign Quartz F31 Sports Wagon | BMW 624 wheels | KW Street Coil Overs | DINAN Stage 1 v2.0 | Soul Performance Muffler delete |
Appreciate
0
|
03-15-2016, 04:19 PM | #739 | |
Lieutenant
458
Rep 590
Posts |
Quote:
__________________
2018 MG F80 M3 ZCP | BBS LM?s | Michelin Pilot 4s | BMW HAS Coil Overs | Stek PPF | DINAN CF Intakes | IND Engine cover | Akrapovic Evolution Exhaust |
2018 Champaign Quartz F31 Sports Wagon | BMW 624 wheels | KW Street Coil Overs | DINAN Stage 1 v2.0 | Soul Performance Muffler delete |
|
Appreciate
0
|
03-17-2016, 03:22 PM | #740 | |
General
2038
Rep 25,989
Posts |
Quote:
__________________
VMR|Wheels | 714.442.7916 |
sales@velocitymotoring.com | www.velocitymotoring.com | facebook | flickr | Instagram |
|
Appreciate
0
|
03-23-2016, 09:21 AM | #741 |
Private First Class
42
Rep 131
Posts |
I have gone through many pages of this thread and it seems as if people's wheels setups are all over the map. I found a deal on a set of wheels with the following specs and I am wondering if I will have major clearance issues, especially in the rear:
18x8.5 ET 40 18x9.5 ET 33 Thoughts? |
Appreciate
0
|
03-24-2016, 04:11 PM | #742 | |
Member.
201
Rep 827
Posts |
Quote:
Rear won't fit at all. Too much poke. |
|
Appreciate
0
|
03-30-2016, 10:25 AM | #743 |
Lieutenant
183
Rep 537
Posts |
Bump. It sounds like the front will be the biggest challenge given the width and using conventional suspension. Any opinions out there?
|
Appreciate
0
|
03-30-2016, 01:04 PM | #744 |
Private
5
Rep 52
Posts |
will this fit
hey guys I'm trying to get some verde axis on my 08 135i. do you think this set up will fit with fender rolling?
front: 19x8.5 et32 225/35/19 Rear: 19x9.5 et36 265/30/19 thanks |
Appreciate
0
|
03-30-2016, 01:50 PM | #745 | |
Member.
201
Rep 827
Posts |
Quote:
|
|
Appreciate
0
|
03-30-2016, 03:15 PM | #746 |
Private
5
Rep 52
Posts |
Thanks infamouskicks----
my only other option is 8.5 +45 in the front 9.5 +48 in the rear you think this will work? I really wana go with the lower offset cause the concave on these rims look way better |
Appreciate
0
|
04-02-2016, 03:50 AM | #747 | |
Member.
201
Rep 827
Posts |
Quote:
|
|
Appreciate
0
|
04-07-2016, 10:15 PM | #748 |
Captain
192
Rep 893
Posts
Drives: 135is :) 192/586
Join Date: Mar 2011
Location: LA, CA
|
Can these fit on an all stock car except for M3 bits?
18x8 et45 w/ 245/35 r18 front 18x8 et45 w/ 245/35 r18 rear Would 18x8.5 et45 be better for the rear? Would 235/40 up front be better? I've been told that 18x8.5 et45 with 245/35 will rub on a totally stock car so that seems out. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|