Auto leveling headlights with a lowered car

[f87CSdrifterential]

With the lowering of our cars is it necessary to use a different arm to achieve proper headlight levels? I had to do this on my Audi A3.

I have gone down about a half inch, but I feel like the low beams don't reach as far.

[1and1]

No worries- it's a thing with 135 headlights aiming a touch low, regardless of your suspension settings. 1.5, maybe 2, turns of the adjustment screw, counter-clockwise, should be enough to get you all set.

[HawkeyeGeoff]

Originally Posted by 1and1

No worries- it's a thing with 135 headlights aiming a touch low, regardless of your suspension settings. 1.5, maybe 2, turns of the adjustment screw, counter-clockwise, should be enough to get you all set.

+1. I always adjust my right headlight to be a bit higher due to living in deer country.

[f87CSdrifterential]

Perfect, thank you guys. I was worried the adjustment screw wouldn't be enough. It wasn't in my A3 and I had to make a shorter arm with heim joints.