DP installation

aws · 10-22-2011, 12:15 AM

Has anybody attempted to do a DP replacement on aussie 135i? Have tried to work off the notes from otehr installs but struggling with getting the o2 sensor behind the piping next to the steering rack. Any info on how-to and tools would be much appreciated.

MikeVictor · 10-22-2011, 12:38 AM

I've heard it's a bitch. Have you checked out the DIY section on this site?

JB4-335 · 10-22-2011, 12:49 AM

STOP RIGHT THERE. DON'T DO IT.
What Dp's do you have? Most have an issue with the rear turbo o2 bung. It will need to be relocated.

aws · 10-22-2011, 01:22 AM

Quote:

Originally Posted by JB4135

STOP RIGHT THERE. DON'T DO IT.
What Dp's do you have? Most have an issue with the rear turbo o2 bung. It will need to be relocated.

I have the DP's from AR. They assued me this is a good fit? Have the DIY information but these were done on US cars where there is enough room to get in there and loosen the sensors.

mcmn · 10-22-2011, 01:26 AM

I'm about to do this, infact I was going to do it myself today. I dont believe the AR's need the bungs relocated.

Paul

aws · 10-22-2011, 01:39 AM

Great. Can you share your experience as I have struggled and really contemplating I have to take the steering off. Looking forward to your experience.

Quote:

Originally Posted by mcmn

I'm about to do this, infact I was going to do it myself today. I dont believe the AR's need the bungs relocated.

Paul

micha3l · 10-22-2011, 02:46 AM

I didn't do the install myself, but my AR downpipes fit without any issues.

TimMc · 10-22-2011, 03:21 AM

I'm looking at getting my 2nd had ARs (removed from a local 335), ceramic coated before getting someone who's done it before to install them. Hopefully in the next few weeks.

aws · 10-22-2011, 04:18 AM

Can I ask who did your install and if possible, how much?

Quote:

Originally Posted by micha3l

I didn't do the install myself, but my AR downpipes fit without any issues.

micha3l · 10-22-2011, 06:26 AM

Is that Adrian? How you going?

I got mine done at bps in Cleveland, they charged $500.

I know other guys have had it done at Accelerate Automotive in Coopers Plains who do awesome work, think they do it for $400.

There is a fair bit of labour due to the cramped install.

RaihaX · 10-22-2011, 07:04 AM

My DP should be coming in next week hopefully the install wont be too problematic as well!

good luck on your install.

aws · 10-22-2011, 07:25 AM

Michael,
Thanks for the info and congrats on your record making moment. Thanks for the two installers. I think i'll go with these guys in Cleveland.

Quote:

Originally Posted by micha3l

Is that Adrian? How you going?

I got mine done at bps in Cleveland, they charged $500.

I know other guys have had it done at Accelerate Automotive in Coopers Plains who do awesome work, think they do it for $400.

There is a fair bit of labour due to the cramped install.

micha3l · 10-22-2011, 04:56 PM

Car is looking good by the way!

Have seen it a few times driving around, definitley need to post some pics!

mcmn · 10-25-2011, 04:35 AM

so you chickened out aws?

I will do mine on the weekend if my wifey allows me the time... famous last words I'm sure I'll update the thread on sunday cursing

Jeef Beef · 10-25-2011, 06:47 AM

Quote:

Originally Posted by aws

Michael,
Thanks for the info and congrats on your record making moment. Thanks for the two installers. I think i'll go with these guys in Cleveland.

I wouldn't attempt it myself, not worth the skin on your fingers or the effort required.

ARE YOU DRIVING TO THE INSTALLERS WITHOUT DOWNPIPES AT ALL? I want to hear your car.

aws · 10-25-2011, 08:41 AM

Quote:

Originally Posted by mcmn

so you chickened out aws?

I will do mine on the weekend if my wifey allows me the time... famous last words I'm sure I'll update the thread on sunday cursing

I gave it my best shot. Went as far as modifying a 7/8 spanner (shortened and grinded) and still could not get enough room to loosen this. Let me know how you go as I'm still keen to have a crack at it. I don't like loosing

pcockley · 10-25-2011, 06:56 PM

Quote:

Originally Posted by Jeef Beef

I wouldn't attempt it myself, not worth the skin on your fingers or the effort required.

ARE YOU DRIVING TO THE INSTALLERS WITHOUT DOWNPIPES AT ALL? I want to hear your car.

JB can you tell me where you got your DP's installed?? I have had mine for a while and just rec'd delivery of the ETS FMIC and am looking to get both installed on the same day.

mcmn · 10-25-2011, 07:18 PM

Quote:

Originally Posted by pcockley

JB can you tell me where you got your DP's installed?? I have had mine for a while and just rec'd delivery of the ETS FMIC and am looking to get both installed on the same day.

Advan I'm guessing.

DIY Mate, if you fail atleast you've learnt something!!

pcockley · 10-25-2011, 07:23 PM

Quote:

Originally Posted by mcmn

Advan I'm guessing.

DIY Mate, if you fail atleast you've learnt something!!

Yeh Thanks I just booked with Advan for next week. You mean if I fail I will learn to get the bus

Jeef Beef · 10-25-2011, 09:02 PM

Quote:

Originally Posted by mcmn

Advan I'm guessing.

DIY Mate, if you fail atleast you've learnt something!!

Quote:

Originally Posted by pcockley

Yeh Thanks I just booked with Advan for next week. You mean if I fail I will learn to get the bus

Correcto! Pete's a good guy

Stuart@BMRAutowerkes · 10-25-2011, 11:15 PM

Quote:

Originally Posted by mcmn

so you chickened out aws?

I will do mine on the weekend if my wifey allows me the time... famous last words I'm sure I'll update the thread on sunday cursing

JB4-335 · 10-26-2011, 02:32 AM

Quote:

Originally Posted by pcockley

JB can you tell me where you got your DP's installed?? I have had mine for a while and just rec'd delivery of the ETS FMIC and am looking to get both installed on the same day.

I had my dps installed in Bromspec in Brookvale. I did the ETS IC myself.

ETS FMIC FTW!!!!

10-22-2011, 12:15 AM	#1
aws Enlisted Member 5 Rep 34 Posts Drives: BMW 125i Join Date: Sep 2010 Location: Brisbane iTrader: (0) Garage List 2008 135i [1.00]	DP installation Has anybody attempted to do a DP replacement on aussie 135i? Have tried to work off the notes from otehr installs but struggling with getting the o2 sensor behind the piping next to the steering rack. Any info on how-to and tools would be much appreciated.
	Appreciate 0 Tweet Quote

10-22-2011, 12:38 AM	#2
MikeVictor Brigadier General 210 Rep 3,288 Posts Drives: anything given a chance Join Date: Jul 2008 Location: .au iTrader: (0) Garage List 2016 Mazda ND MX-5 [10.00]	I've heard it's a bitch. Have you checked out the DIY section on this site?
	Appreciate 0 Quote

10-22-2011, 12:49 AM	#3
JB4-335 Brigadier General 168 Rep 3,093 Posts Drives: E92 BSM & E70 AW Join Date: Feb 2011 Location: Australia iTrader: (1)	STOP RIGHT THERE. DON'T DO IT. What Dp's do you have? Most have an issue with the rear turbo o2 bung. It will need to be relocated.
	Appreciate 0 Quote

10-22-2011, 01:26 AM	#5
mcmn Captain 28 Rep 693 Posts Drives: MY10 AW 135i Join Date: Jun 2011 Location: Melbourne iTrader: (0)	I'm about to do this, infact I was going to do it myself today. I dont believe the AR's need the bungs relocated. Paul
	Appreciate 0 Quote

10-22-2011, 02:46 AM	#7
micha3l Lieutenant 26 Rep 513 Posts Drives: 2011 BMW M3 Join Date: Dec 2009 Location: Brisbane, Australia iTrader: (0)	I didn't do the install myself, but my AR downpipes fit without any issues. __________________ 2011 BMW M3 - Mineral White - VF620 Supercharger - Gintani Sport Valved Exhaust - Harrop BBK - Arykym Front lip and Diffuser - KW Sleeve over kit - Forgestar CF5V Wheels 2009 BMW 135i - Space Grey - 11.841 @ 117.81mph - SOLD
	Appreciate 0 Quote

10-22-2011, 03:21 AM	#8
TimMc Lieutenant Colonel 44 Rep 1,883 Posts Drives: E90 M3 Join Date: Aug 2008 Location: Brisbane, Australia iTrader: (0)	I'm looking at getting my 2nd had ARs (removed from a local 335), ceramic coated before getting someone who's done it before to install them. Hopefully in the next few weeks.
	Appreciate 0 Quote

10-22-2011, 06:26 AM	#10
micha3l Lieutenant 26 Rep 513 Posts Drives: 2011 BMW M3 Join Date: Dec 2009 Location: Brisbane, Australia iTrader: (0)	Is that Adrian? How you going? I got mine done at bps in Cleveland, they charged $500. I know other guys have had it done at Accelerate Automotive in Coopers Plains who do awesome work, think they do it for $400. There is a fair bit of labour due to the cramped install. __________________ 2011 BMW M3 - Mineral White - VF620 Supercharger - Gintani Sport Valved Exhaust - Harrop BBK - Arykym Front lip and Diffuser - KW Sleeve over kit - Forgestar CF5V Wheels 2009 BMW 135i - Space Grey - 11.841 @ 117.81mph - SOLD
	Appreciate 0 Quote

10-22-2011, 07:04 AM	#11
RaihaX Major General 156 Rep 4,995 Posts Drives: 08' 135i Join Date: Aug 2008 Location: Australia, Perth iTrader: (2)	My DP should be coming in next week hopefully the install wont be too problematic as well! good luck on your install.
	Appreciate 0 Quote

10-22-2011, 04:56 PM	#13
micha3l Lieutenant 26 Rep 513 Posts Drives: 2011 BMW M3 Join Date: Dec 2009 Location: Brisbane, Australia iTrader: (0)	Car is looking good by the way! Have seen it a few times driving around, definitley need to post some pics! __________________ 2011 BMW M3 - Mineral White - VF620 Supercharger - Gintani Sport Valved Exhaust - Harrop BBK - Arykym Front lip and Diffuser - KW Sleeve over kit - Forgestar CF5V Wheels 2009 BMW 135i - Space Grey - 11.841 @ 117.81mph - SOLD
	Appreciate 0 Quote

10-25-2011, 04:35 AM	#14
mcmn Captain 28 Rep 693 Posts Drives: MY10 AW 135i Join Date: Jun 2011 Location: Melbourne iTrader: (0)	so you chickened out aws? I will do mine on the weekend if my wifey allows me the time... famous last words I'm sure I'll update the thread on sunday cursing Last edited by mcmn; 10-25-2011 at 04:42 AM..
	Appreciate 0 Quote