|
|
|
03-20-2013, 02:37 PM | #1 |
Private First Class
11
Rep 123
Posts |
What size azenis rt-615s will fit the 128i?
I have the stock m sport wheels but will in all likelyhood be replacing them with something lighter. Will any of the azenis rt-615s fit? If not can anyone suggest a similar supper stiff sidewall super sticky tire that I can drive on the street and the track as long as it isn't through standing water?
|
03-20-2013, 07:14 PM | #2 |
Just one more taste...
566
Rep 2,011
Posts |
You could run a 225/40/18 square setup and have a nice balanced setup. They look like exactly what you're looking for honestly.
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
Appreciate
0
|
03-21-2013, 04:52 PM | #4 |
Private First Class
11
Rep 123
Posts |
one more question- should i go with 18x7,5 or 18x8,5 rims?i've opted for breyton race gts-r rims and they come in those two sizes. thanks again.
|
Appreciate
0
|
03-21-2013, 08:13 PM | #5 |
Just one more taste...
566
Rep 2,011
Posts |
Whichever one has the better offset. Might as well go square wheels to allow 4wheel rotate.
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
Appreciate
0
|
03-21-2013, 08:27 PM | #6 |
Private First Class
11
Rep 123
Posts |
|
Appreciate
0
|
03-22-2013, 07:00 AM | #7 |
Just one more taste...
566
Rep 2,011
Posts |
18x8.5 ET48 should work well on all 4 corners. You could easily run a slightly wider tire though, 235/40/18 would work well and provide good balance.
|
Appreciate
0
|
03-22-2013, 10:42 AM | #9 |
Just one more taste...
566
Rep 2,011
Posts |
Not likely. If at all, it would be the front and pulling the alignment pin in the front should make you clear anything that you might very lightly rub.
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|