|
|
|
02-18-2011, 04:06 PM | #1 |
Private
1
Rep 56
Posts |
Removing DP Fix
I'm in the process of upgrading from the JB3 to the JB4, but I realized that in order to remove the DP fix V.2 I need 3 wires that I now don't have. Does anyone have an idea of how I can remove the DP fix without having those wires? I searched and couldn't find much.
|
02-18-2011, 04:29 PM | #2 |
Colonel
381
Rep 2,926
Posts
Drives: Cayman GT4, 135i
Join Date: Apr 2008
Location: NJ
|
I think you'll have to contact Burger tuning to request these patch cables. If you remove the DP Fix without these cables you'll be getting catylitic errors.
__________________
Current: M2CS
Gone but not forgotten: Cayman GT4, M2C, 2011 135i, E83 X3 6MT, 2016 SO M3, 2012 335iS, 2010 135i and 2006 e90 325xi |
Appreciate
0
|
02-19-2011, 12:39 PM | #4 |
New Member
0
Rep 12
Posts |
Just move 3 cables from other positions in the JB-harness. Look for empty slots in the BMW-harness.
__________________
BMW 135i -08
AR DP, Berk full exhaust, RB turbos, COBB AP/JB4, CMGS, AMS FMIC, STETT CP My car: http://www.garaget.org/?car=169403 |
Appreciate
0
|
02-19-2011, 12:44 PM | #5 |
Colonel
381
Rep 2,926
Posts
Drives: Cayman GT4, 135i
Join Date: Apr 2008
Location: NJ
|
good idea
__________________
Current: M2CS
Gone but not forgotten: Cayman GT4, M2C, 2011 135i, E83 X3 6MT, 2016 SO M3, 2012 335iS, 2010 135i and 2006 e90 325xi |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|