Turn Signal 128i--front

[lainmike0710]

Alright, I know there is a post or two regarding this topic but I've not found any actual DIYs. I know it is simple but I am curious if the bulb can be replaced from under hood behind light cover or do you need to go in under wheel well? Please let me know when anyone gets a moment

[E82MSport]

There should be an access panel inside the wheel liner that is removable. At least that's the case on the 135i with HID's but I doubt the halogens are any different.

There's also a description in the owner's manual.

[lainmike0710]

Originally Posted by E82MSport

There should be an access panel inside the wheel liner that is removable. At least that's the case on the 135i with HID's but I doubt the halogens are any different.

There's also a description in the owner's manual.

I'll check it out...its 128i adaptive hid...did you have to remove light cover first?

[E82MSport]

[lainmike0710]

Originally Posted by E82MSport

Awesome, never knew it...are those your pics I couldn't find much on the topic...

[E82MSport]

The pic of the wheel opening is mine, the other was borrowed from Google. I added the arrows and text.

[lainmike0710]

All good, I did both sides as I have a tail light bulb out as well and Tischer informed me they were the same bulbs but they are not so I had two and apparently I had the standard amber colored bulbs in there currently and had ordered the nicer silver coated amber bulbs and wanted them to match up...naturally.....thanks a ton!