Sponsored by The Tire Rack

[wdewili]

hi all, I'm from Spain and I am writing to ask you about VMR VB3 tire anthracite for my series 1 coupe.yo not know if I want to put measures are appropriate, which I sell them here that sells me, tells me to put on the front axle 225/40/18 tires with wide and 8.5 x18 ET 40, 245/35/18 in the rear tire width of 9.5 x18 and 45.Creeis ET that should put and 45 front and 50 behind, or those measures okay? I will not have problems? or I will rub the wheels? thank you very much in advance

[wdewili]

someone could help me with the dimensions of the tires? would have problems, I would come close?thanks

[wdewili]

please help me guys..

[wdewili]

Why anybody want help me? WHY? please i need your advices..

[chachacha28]

I dont totally understand the question. you just want to figure out if your tires will rub the car? are you on stock suspension, or is your car lowered?

http://www.1010tires.com/wheeloffsetcalculator.asp

this site is very helpful when you are trying to figure out if wheels will fit, you will have to actually measure your car to see if they will fit.

you could also go the the wheel and tire section of this website and see if anyone has the same size wheels, and what offset they used.

you are using pretty thin tires (compared to most), which will help with the wheel fitment because your tires will be nicely stretched.

sorry i couldnt help more, i have the stock 264's.

[wdewili]

I want to know is whether these measures I have put the VMR VB3 problemas.i want kno if the et is adequate or if it is too wide 9.5 in rear.He read that you put 255 back wheel, but I I think I put too then i will put 245 and if not if I brush against the car, when I go with very much peopel in my car.mi car have the pack m.thank you very much