|
|
|
09-03-2013, 06:23 PM | #1 |
Colonel
171
Rep 2,347
Posts |
Koni yellows swift springs M3 bits installed
So finally got all the parts installed by VinnyTenRacing a nice local performance shop. I'm still waiting to get a 4-wheel aligment(car goes in Thursday) by TKX performance.
So here's the list of the parts installed -M3 upper and lower control arms -M3 front sway bar -M3 rear subframe bushings -M3 rear guide rods -M3 rear upper link kit -Koni yellows/SwiftspecR springs I only drove the car a short distance, and for obvious reasons I wasn't testing out the new setup in the corners. I did have to drive it on the highway for a short period and the car felt rock solid. Hit a couple level changes on the highway and the rear end was like a rock no wiggles no jumping no shaking. I have the Yellows set at half way all around with the swift springs to compliment them. The ride is sublime compared to the stock set up. I will give a thorough review on my new set up Thursday night after the aligment also will post pictures up as soon as I have a nice day the weather has been crappy the past couple days.
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
09-03-2013, 07:53 PM | #3 | |
Second Lieutenant
39
Rep 257
Posts |
Quote:
|
|
Appreciate
0
|
09-03-2013, 08:54 PM | #4 |
Freude am Fahren
31
Rep 703
Posts
Drives: B9 Audi S5 Coupe
Join Date: Oct 2007
Location: Sierra Nevada Foothills, California
|
I have the same setup, minus the springs. The biggest surprise for me was how much better the ride quality became. Much more comfortable than stock.
|
Appreciate
0
|
09-03-2013, 08:56 PM | #5 | |
First Lieutenant
40
Rep 323
Posts |
Quote:
|
|
Appreciate
0
|
09-03-2013, 09:03 PM | #6 |
Colonel
171
Rep 2,347
Posts |
+1
Ride is amazing now what springs do you have?
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
09-03-2013, 09:04 PM | #7 |
Colonel
171
Rep 2,347
Posts |
Roger that
Ill get some up tomorrow
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
09-03-2013, 09:22 PM | #8 | |
Major
30
Rep 1,364
Posts |
Quote:
I bet you'll hang with the e46 |
|
Appreciate
0
|
09-03-2013, 10:17 PM | #9 |
Colonel
171
Rep 2,347
Posts |
LMAO
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
09-04-2013, 06:51 AM | #11 |
Colonel
171
Rep 2,347
Posts |
I hope so
This has been a long time coming. I'm sure it's worth it, I read your reviews on the swifts it swayed me towards them! So thanks
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
09-04-2013, 10:17 AM | #12 |
Colonel
171
Rep 2,347
Posts |
this site sucks with photos lol check out my Instagram walkingthedead1
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms Last edited by Zombie1; 09-04-2013 at 10:35 AM.. |
Appreciate
0
|
09-04-2013, 11:43 AM | #13 |
Colonel
171
Rep 2,347
Posts |
A side shot
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
09-04-2013, 02:59 PM | #15 |
Colonel
171
Rep 2,347
Posts |
Thanks!
The motor finally has a proper suspension to tame the beast
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
09-04-2013, 03:15 PM | #16 |
Major
652
Rep 1,406
Posts
Drives: 2020 SO - M2C
Join Date: Dec 2010
Location: KOP, PA
|
what it all cost ya?
|
Appreciate
0
|
09-04-2013, 03:44 PM | #17 |
Colonel
171
Rep 2,347
Posts |
Ehh after install
Im guessing 3-3.5 id have to go back and look I bought all the pieces month to month and just piled them up in my room. Whatever the exact # it was worth it.
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
09-04-2013, 05:03 PM | #18 |
First Lieutenant
40
Rep 323
Posts |
|
Appreciate
0
|
09-05-2013, 01:30 AM | #20 |
Second Lieutenant
39
Rep 257
Posts |
I have almost the same set up. Front M3 control arm kit plus M3 subframe bushings and alignment Labor was 1k. I did the front sway bar myself as well as the rear M3 upper guide rod and upper link kit. I did the rear springs and shocks myself, but had a shop do the front springs, struts and add Dinan camber plates. They added an alignment and I recall labor was $300. So $1300 labor for everything with some DIY on my own. This was not done all at once, but in stages, hence the multiple alignments.
Last edited by jafo1701; 09-05-2013 at 07:26 AM.. |
Appreciate
0
|
09-05-2013, 06:26 AM | #21 |
Colonel
232
Rep 2,643
Posts |
That's a lot of changes! It will be like a completely different car, and I know you will be smiling because I have a similar setup. Those VMRs look great too.
|
Appreciate
0
|
09-05-2013, 08:11 AM | #22 |
Colonel
171
Rep 2,347
Posts |
Thank you
Yeah I love these VMRs, just dropped car off for an four wheel alignment ill write thorough review tonight or tomorrow guys!
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|