08-04-2015, 02:55 AM | #1 |
New Member
3
Rep 8
Posts |
Turbo boost issue with my 1m
Hello friends,
I recently bought a 1M. I have some recent problem with it Here is the problem (when it happens): In acceleration (kickdown)under 3500 rpm, the turbo boost in very low. I can see it because i have a Awron display and feel it because the power is low. Above 3500rpm the boost arrives and it is too hight. The car goes in limp mode and the stored errors are Boost too low and boost too high. The problem occured for the first while i driving from spain to france and the weather was very hot. I went to BMW, they change the 2 wastegate solenoids but it does not solve my problem. During the 1600kms from spain to france, the problem occured many time. It always happens if I turned off/turn on the car, and after 30 minutes/1 hour the car worked again normally. Since i'm back in france, i had the problem only one time and only during one acceleration. The car seems to work normally, but sometime have a wastegate sound in idle. Can i be a wategate issue (sometimes one of it does not totally close) ? Any ideas ? Thanks for your help.
__________________
///M
Last edited by cosmick; 06-02-2016 at 09:06 AM.. |
08-04-2015, 06:49 AM | #2 |
European Editor
10532
Rep 22,992
Posts |
I bet it's your wastegates actuator arms biding. They aren't moving(opening and closing) freely.
Maybe test your vacuum lines...
__________________
|
Appreciate
0
|
08-04-2015, 07:05 AM | #4 |
European Editor
10532
Rep 22,992
Posts |
Yes, IF it is the turbo's actuator arms(wastegate) arms that are binding(not opening and closing smoothly).
__________________
|
Appreciate
0
|
08-04-2015, 01:12 PM | #8 |
Colonel
291
Rep 2,898
Posts |
|
Appreciate
1
|
Post Reply |
Bookmarks |
|
|