11-24-2012, 07:25 PM | #1 |
Enlisted Member
![]() ![]() 10
Rep 43
Posts |
Brake upgrades
Has anyone done a brake upgrade to a Stop-Tech or Brembo kit? If you did what has been your experience with the upgrade? Do you do just the front or both the front and rear?
Did anyone put the Stop-Tech 380mm kit on with 18 inch wheels? It's my understanding that the Stop-Tech 380mm kit will fit with Apex ARC-8 18x10 wheels but the Brembo 380mm kit won't fit. Can anyone confirm this? Thanks
__________________
2011 1M AW, 2011 A3 TDI, 2013 Mini JCW, 2014 F150, 2016 Focus RS on order
|
11-24-2012, 07:50 PM | #2 | |
Colonel
![]() 292
Rep 2,898
Posts |
Quote:
FWIW, I've added brake cooling to my front brakes. Along with stainless steel brake lines, good brake fluid and titanium shims, I'm very happy with my brakes. If I were to upgrade, I'd keep the calipers and go with the Performance Friction direct drive rotors -- a true floating rotor design. Should also have mentioned that I run PFC-08 or 01 pads Neil |
|
Appreciate
0
|
11-24-2012, 08:13 PM | #3 |
Enlisted Member
![]() ![]() 10
Rep 43
Posts |
I've got the steel brake lines and PFC-01 pads already.
I'm looking for a solution that doesn't eat brake pads at the rate I'm using them. I'm getting 10 to 12 30 minute sessions at Road America on a set of front pads. I'm getting to 150 3 places on the track. Maybe some brake cooling would help with the pad wear. It would also be very nice to be able to change the pads without taking the caliper off. When I had Brembo brakes on my E46 M3 I could change the pads in about 5 minutes per wheel even when they were hot.
__________________
2011 1M AW, 2011 A3 TDI, 2013 Mini JCW, 2014 F150, 2016 Focus RS on order
|
Appreciate
0
|
11-24-2012, 08:51 PM | #4 | |
Colonel
![]() 292
Rep 2,898
Posts |
Quote:
PFC-08 pads last way longer than PFC-01s. Neil Last edited by MDORPHN; 11-24-2012 at 09:07 PM.. |
|
Appreciate
0
|
11-26-2012, 02:45 PM | #5 |
Brigadier General
![]() ![]() 191
Rep 4,848
Posts |
My Brembo kit is sitting at customs at the moment. I will let you know how I go, hopefully have them installed next week. I am pretty sure you need 19s to fit the 380mm, and you have to take the callipers off to fit new pads in.
__________________
Macan S Diesel - Carrera White
Macan Turbo - White 1///M - Valencia Orange |
Appreciate
0
|
11-27-2012, 12:10 PM | #6 |
WTF does Stage 1 mean?
273
Rep 311
Posts |
Take a look at the PFC BBK. I've ran through just about all of the kits on the market, and the PFC kit is my favorite by far. Plus running 18's is a non issue due a smaller rotor.
|
Appreciate
0
|
11-27-2012, 06:50 PM | #7 | |
Enlisted Member
![]() ![]() 10
Rep 43
Posts |
Quote:
Can the PFC kit be $2,400 better than the StopTech kit?
__________________
2011 1M AW, 2011 A3 TDI, 2013 Mini JCW, 2014 F150, 2016 Focus RS on order
|
|
Appreciate
0
|
11-27-2012, 09:12 PM | #9 | |
Brigadier General
![]() ![]() 275
Rep 3,164
Posts
Drives: Many
Join Date: Feb 2009
Location: North of 7K RPM
iTrader: (1)
Garage List 2020 BMW M2 CS [0.00]
1994 Audi RS2 Avant [0.00] 2021 Audi RS6 Avant [0.00] 1988 BMW E30 M3 [0.00] 2011 BMW 1///M [0.00] 2017 BMW F80 M3 30 ... [0.00] 2018 Porsche 991.2 GT3 [0.00] 2015 Porsche Macan ... [0.00] 1998 Porsche 993 C4S [0.00] 1994 Lancia Delta I ... [0.00] 2008 Audi RS4 [0.00] |
Quote:
__________________
2011 BMW E82 1///M: AW, all options; Renntech, Akrapovic, Forge, P3, RevoZ CF bits, many mods
1988 BMW E30 M3: Hennarot, S14, stock 2018 Porsche 991.2 GT3: PtS, CXX, LWBS, PCCB 1998 Porsche 993 C4S: Zenith Blue, last aircooled widebody, Bilstein PSS10, Fister II + Fabspeed exhaust 2008 Audi B7 RS 4: Sprint Blue, Audi Exclusive Euro Bucket Interior, Premium+Titanium, many mods |
|
Appreciate
0
|
11-28-2012, 10:17 AM | #10 |
Private First Class
![]() ![]() 7
Rep 140
Posts |
![]() ![]() ![]() ![]() The brakes are more precise and they fit the 18" arc-8 wheels. If you are a track racer and like to do several laps without stoping for cooling, the bbk kit is what you need. I´m using the Hawk DTC-70 and PFC01, both very good pads. I recommend you install with any pad a heat shield. The StopTech pads have this heat shield and it is removable... use it with the performance pads. |
Appreciate
0
|
11-28-2012, 05:03 PM | #11 |
Supreme Allied Commander
![]() ![]() 3847
Rep 54,378
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Stoptech 380mm will fit within the ARC8 wheels.
Hawk DTC-70 and PFC01 are excellent pads. The new PFC06 and 08 will last longer and give up very little in overall bite. |
Appreciate
0
|
11-28-2012, 05:05 PM | #12 |
Supreme Allied Commander
![]() ![]() 3847
Rep 54,378
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Yes, with Brembo 380mm 19" wheels minimum.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|