BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      01-05-2011, 06:54 PM   #1
COBB Tuning
Major
COBB Tuning's Avatar
231
Rep
1,051
Posts

Drives: 335i
Join Date: Dec 2010
Location: Austin, TX

iTrader: (0)

All COBB Tuning AccessPORT for 135i Discussion Here

*** Update ***

Car has been retested and updated dyno graph is shown below.


---------------------------------------------

We wanted to create a new thread to capture all discussion and questions regarding the upcoming release of the 2008-2010 BMW 135i N54 AccessPORT. This will allow us to stay on top of the discussion and provide quick responses to questions in a single location. We have people standing by watching this thread right now, because the COBB Tuning AccessPORT for the BMW 135i will be available tomorrow, January 6th, 2011!

We offer a 30 day satisfaction guarantee on the AccessPORT, so if you are unsatisfied with the performance of the AccessPORT in any way, uninstall and return it within 30 days of purchase for a full refund. While we offer this guarantee for direct purchases, we can not force all of our dealers to comply with this policy, so make sure you discuss their return policy to ensure that they will honor it.

We are very excited to be involved with the BMW enthusiast community and look forward to meeting your tuning needs!

Here is a copy of the press release that is going up on our blog shortly.
------------------------------------------------------------------------


Introducing the COBB Tuning AccessPORT for 2008-2010 BMW 135i, 335i and 535i vehicles equipped with the N54 twin turbo engine. The AccessPORT brings hand-held ECU flashing, managing and monitoring convenience to BMW, unleashing untapped power hidden in the ECU with just the push of a button. The AccessPORT lets you quickly reprogram your car’s ECU with performance-tuned calibrations for instant power gains without any tools, wiring, soldering or downtime. Reprogramming the ECU generates significant power gains while retaining the sophisticated control logic and refined engine response developed by BMW engineers. Simply plug the AccessPORT into your car, install the desired calibration and enjoy the thrill of big gains in torque and horsepower!

The AccessPORT puts control in the hands of the enthusiast. Install the AccessPORT at your convenience in less than 20 minutes from the comfort of your driver seat. The AccessPORT is able to store multiple calibrations, making map switching easy with just the touch of a button in under a minute. Choose from many pre-tuned maps for different levels of modifications and types of fuels and be ready for any situation. For extreme modifications or maximum power output, our ProTuner network can custom tune your setup on a dyno using our soon to be released AccessTUNER Pro tuning software.

Flashing the ECU for increased performance is just the start of what the AccessPORT is capable of. Set the AccessPORT to Performance Mode to capture 0-60MPH times, ¼ Mile times and Trap Speeds. Switch over to Live Data and choose a gauge to monitor, such as; oil temperature, intake air temperature, throttle position, ignition timing, boost, MAF voltage, air/fuel ratio and many more. Select the integrated Data Logging function to record multiple channels of data for up to 10 hours for in-depth performance analysis. Go to Troubleshooting mode to diagnose issues by reading trouble codes and resetting the system once the issues have been resolved. Users can even configure the AccessPORT as a shift light that flashes the screen at whatever RPM you choose.

The AccessPORT can even eliminate separation anxiety for those times you are away from your car. Protect your investment when out on the town by quickly loading the Valet map to limit engine revs and boost. And when it’s necessary to remove the AccessPORT, the uninstall process is simple, taking under 10 minutes and restoring the ECU to its original condition. The AccessPORT can be installed and uninstalled as many times as needed without fuss or hassle.

The AccessPORT from COBB Tuning is the most comprehensive hand-held ECU flashing, managing and monitoring device available for 2008-2010 BMW 135i, 335i and 535i vehicles. Satisfy your hunger for more power and control. Access the potential of your BMW today!

Part Number: AP-BMW-001
Retail Price: $895.00

The AccessPORT for 08-10 BMW 135i, 335i and 535i vehicles will be available for purchase starting January 6th, 2011 at all COBB Tuning Retail locations and online at cobbtuning.com!

---------------------------------------------------------

Note
Occasionally an "Unrecognized ROM" will be discovered during the AccessPORT Install process. If an "Unrecognized ROM" is encountered, the user will be prompted to dump the ROM using the onboard Dump ROM tool built into the AccessPORT. Simple step-by-step instructions for dumping an "Unrecognized ROM" can be found here. The ROM is then emailed to COBB Tuning and incorporated into the firmware. COBB Tuning will make every effort to incorporate these new ROMs as quickly as possible. This process can take up to five business days.


BMW AccessPORT FAQ

What models are currently supported by the AccessPORT?
The AccessPORT is available for N54 2008-2010 BMW 135i, 335i and 535i only.

When will there be support for XXX N54 equipped BMW's?
Here are the development priorities for us right now.
1. Continue to find ROMs for 2008-2011 N54 turbo engined cars and create maps for the 1, 3 and 5 series. This includes the xi and is. We are waiting for a ROM to be provided for the N54 equipped Z4 to see what efforts are required. The X6 is currently lowest on the priority list for N54 vehicle support.
2. Finish developing the serial based communications protocol to enable AccessPORT compatibility with 2007 model year 1, 3 and 5 series.
3. Stage2 maps for supported vehicles.
4. Finish development of AccessTUNER Pro and get this into the hands of professional tuners (end of 1Q11).
5. AccessTUNER Race end-user tuning software will be released after AccessTUNER Pro has stabilized.

Is there/will there be 2007 335i support?
Yes, however at this time there we do not have an AccessPORT for the earlier 2007 335i. Support for this model and year is one of our top priorities.

Is there 335xi support?
Not at this time, however support for the N54 xi is one of our top priorities.

When will there be support for EU, Gulf Spec, Australian spec N54 equipped BMW's?
Although the ECUs may be similar, there is a significant amount of effort and support required for each global region. There are an equal or greater number of the ROMs for each make/model/year in each region as well as different fuel grades to account for. Then calibrations must be developed for each of these vehicles with the appropriate fuel grade, and further testing must be accomplished before the release of the product. Then support must be provided to improve calibrations based on new developments, customer feedback, etc. This is on a region by region bases. At this time, we are focusing on developing our full-tuning-solution for the breadth of N54 based twin-turbo based vehicles in the USDM region before moving on to other world regions. We do not have an ETA for support outside of the USDM at this time.

When will there be support for N55 based single turbo BMW's?
We do not have an ETA on availability of the AccessPORT for N55 vehicles at this time. Our current priority is to provide our full-tuning-solution for the twin-turbo N54 equipped 1, 3 and 5 series BMW's. While some development has begun on the N55, there is a lot left to do on the N54 before we put significant focus on the N55.

I have a naturally aspirated M3, 128i, 328i, etc. will there be an AccessPORT for my car?
At this time we are concentrating on the 2008-2010 turbocharged 135i, 335i and 535i. We currently have no plans to develop the AccessPORT for NA vehicles.

I already have lots of modifications and downpipes, can I get a map for my car?
We will be releasing more maps for these vehicles in the very near future. We are currently refining our Stage1 offerings and will follow up with Stage2 maps once testing is completed. AccessTUNER Pro software for professional tuning shops is expected to be available by the end of the first quarter of 2011.

Will tuning software become available? Can I get a custom tune?
AccessTUNER Pro is expected to be available to professional tuners by the end of 1Q11. We encourage you to inform your tuner of choice that you are interested in having your AccessPORT equipped BMW pro-tuned.

Does the AccessPORT need to stay connected to the car for my tune to work?
No, the AccessPORT reflashes your ECU with a new calibration that is written to the ECU. Once you flash the map on, you can unplug the AccessPORT and the map will be on the ECU until you uninstall the AccessPORT. Removing the battery or resetting the ECU will not affect the tune. You may plug the AccessPORT in at any time to utilize the additional features provided by the AccessPORT (Live Data, Data Logging, Performance, DTC Scanning).

I already have a reflash on my ECU, is the AccessPORT compatible with this? Will I lose this flash if I install an AccessPORT?
The AccessPORT will more than likely overwrite your reflash, depending on the type of reflash. Some will have to be overwritten while some can be saved using the AccessPORT ROM saving feature. However, you will not be able to interface with a previous flash with the AccessPORT.

Can I use my current piggyback system with the AccessPORT?
We do not recommend this. The AccessPORT is designed to work on its own as a complete tuning solution. Introducing a piggyback system may cause tuning conflicts and other issues. We have not performed any testing on this scenario.

I have upgraded downpipes with high flow cats or not cats at all and I am getting a Check Engine Light for rear O2 sensor codes. Will the AccessPORT be able to turn these codes off?
The ECU uses the rear O2 sensors in daily operation, and these need to remain in the exhaust system for proper engine function. The AccessPORT has the ability to keep the cat inefficiency codes from being thrown on the N54 while maintining proper operation of the O2 sensors when there are no cats or aftermarket cats. Stage2 calibrations will have these codes turned off when they become available.

I just tried to install my AccessPORT and it is telling me that my vehicle is an "Unsupported ROM Version" and won't let me install, what should I do?
You have encountered an ECU that we have not yet added support for. However, the AccessPORT is able to download your vehicle's ROM which you can email to us and we can then add support. To download your ROM, follow the instructions found here: http://cobbtuning.com/info/?id=5848. Next use AccesPORT Manager to save this file to your computer. Then email the file to rom@cobbtuning.com along with your Name, Email address, Vehicle Year Make and Model and transmission type. Once we have the ROM, adding support should only take a few days and we will email you with instructions for adding support to your AccessPORT.

I see a lot of different COBB Tuning Employees posting in the forums, who are these people and what do they do?
The entire COBB Tuning staff takes part in answering questions on the forums. However, these are the staff members you will see and hear from most often.

Rob Irish - BMW ECU Guru in Austin, TX.
Lance Lucas - Lead BMW R&D Calibrator in Austin, TX.
Danny Heng - Marketing and Sales at the SoCal store.
Travis Geny - Online Relations and Marketing at the Surgeline store in Portland, OR.
Kevin Heist - Marketing and Sales for the Plano, TX store.
Gary Sheehan - Marketing Director

What is the cost to upgrade to Stage 2, when it is released?
There is no upgrade associated with Stage1 and Stage2. We will be providing free Stage2 Off-the-Shelf maps in the near future.

Can I take it out and resell the AP unit?
Yes you can. When you Uninstall your AccessPORT, it restores the ECU to its original configuration and the AccessPORT then becomes "Unmarried". It can then be installed and "Married" to any other applicable BMW.

I just went in for service and recieved the BMW 2.40.2 software update, does the AccessPORT support vehicles with this update?
The AccessPORT does support vehicles with this update. 2.40.2 is a version of software BMW uses for flashing the modules in the car. We have seen and flashed ECUs which have been flashed with this version of software. If your car has 2.40.2software, you can install the AccessPORT.

Last edited by COBB Tuning; 01-19-2011 at 04:00 PM..
Appreciate 0
      01-05-2011, 07:49 PM   #2
Das Ein
Captain
Das Ein's Avatar
United_States
30
Rep
815
Posts

Drives: '16 Audi TTS, '17 500 Abarth
Join Date: Aug 2008
Location: The Colony, TX

iTrader: (4)

I love you man.
Appreciate 0
      01-05-2011, 07:51 PM   #3
Dannydeleted
Private
Dannydeleted's Avatar
United_States
4
Rep
83
Posts

Drives: Subaru STi
Join Date: Dec 2010
Location: Fountain Valley

iTrader: (0)

Quote:
Originally Posted by Das Ein View Post
I love you man.
We love you too man!
Appreciate 0
      01-05-2011, 07:56 PM   #4
chancejat
First Lieutenant
chancejat's Avatar
United_States
17
Rep
310
Posts

Drives: bmw
Join Date: Mar 2010
Location: usa

iTrader: (2)

imo, you guys shouldnt have released yet untill you got consistent numbers for the 135/335/535...all your numbers are greatly different for each platform which usally dyno around 10 whp from each other......
Appreciate 0
      01-05-2011, 08:01 PM   #5
MikesBMW
Banned
United_States
318
Rep
1,410
Posts

Drives: X3 M40i
Join Date: Jul 2010
Location: Ohio

iTrader: (1)

Garage List
2019 BMW X3 M40i  [0.00]
2017 BMW X1  [0.00]
OMG OMG OMG 38HP and 61ft/lb Increase!! With no other mods on 93oct pump gas. This might rival the 1M power!
Appreciate 0
      01-05-2011, 08:01 PM   #6
onefastman
Major General
159
Rep
5,689
Posts

Drives: 2009 135i 2011 e92m dct
Join Date: Sep 2009
Location: Earth

iTrader: (15)

Those numbers seem pretty low. So for 900 we get a delta of 30-40hp?
__________________
Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(1addicts.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
Appreciate 0
      01-05-2011, 08:01 PM   #7
badluckm3
Private
10
Rep
89
Posts

Drives: 11 335d, 12 X5D, 99 Mcoupe
Join Date: Nov 2009
Location: Suffolk, VA

iTrader: (0)

Quote:
Originally Posted by chancejat View Post
imo, you guys shouldnt have released yet untill you got consistent numbers for the 135/335/535...all your numbers are greatly different for each platform which usally dyno around 10 whp from each other......
Yea I too was wondering about what accounts for the variance in numbers among the platforms?
Appreciate 0
      01-05-2011, 08:06 PM   #8
Shaggykjb_135I
Private
Shaggykjb_135I's Avatar
United_States
3
Rep
59
Posts

Drives: Sedonna Red 135 6spd. loaded.
Join Date: Nov 2010
Location: Central Texas

iTrader: (0)

Garage List
2008 135i  [0.00]
Is this accessPort going to store the factory tune and be 100% stock ecu when taken into the dealership? Or is it simalar in nature to other flashes were it loads a "stock like" map that is detectable by dealerships?
Appreciate 0
      01-05-2011, 08:09 PM   #9
Dannydeleted
Private
Dannydeleted's Avatar
United_States
4
Rep
83
Posts

Drives: Subaru STi
Join Date: Dec 2010
Location: Fountain Valley

iTrader: (0)

Quote:
Originally Posted by Shaggykjb_135I View Post
Is this accessPort going to store the factory tune and be 100% stock ecu when taken into the dealership? Or is it simalar in nature to other flashes were it loads a "stock like" map that is detectable by dealerships?
Yes

Quote:
Uninstalls just as easily and returns ECU to stock configuration.
Appreciate 0
      01-05-2011, 08:40 PM   #10
MikesBMW
Banned
United_States
318
Rep
1,410
Posts

Drives: X3 M40i
Join Date: Jul 2010
Location: Ohio

iTrader: (1)

Garage List
2019 BMW X3 M40i  [0.00]
2017 BMW X1  [0.00]
I had one for my Evo it was awesome and I was only on a Stage 1 map. I flashed it back to 100% stock when going in for service.
Appreciate 1
      01-05-2011, 08:57 PM   #11
Shaggykjb_135I
Private
Shaggykjb_135I's Avatar
United_States
3
Rep
59
Posts

Drives: Sedonna Red 135 6spd. loaded.
Join Date: Nov 2010
Location: Central Texas

iTrader: (0)

Garage List
2008 135i  [0.00]
This sound intresting. So, the cobb unit has the ability to save propritary bmw software files on it. Will the unit's stages include "bog" sensations or the ability to go WOT instead of the limit that bmw programs into the n54?
Appreciate 0
      01-05-2011, 08:57 PM   #12
collegemt
Private First Class
collegemt's Avatar
16
Rep
102
Posts

Drives: 2011 135i 6MT
Join Date: Aug 2010
Location: Aurora CO

iTrader: (3)

How long until the N55 accessport is released.

Are we looking at 3 months or more like 12 months?
__________________
2011 135i 6mt
Appreciate 0
      01-05-2011, 09:06 PM   #13
cwg
Captain
45
Rep
723
Posts

Drives: 2017 M4 ZCP. AZB on black
Join Date: Nov 2010
Location: Kailua, HI

iTrader: (0)

[QUOTE=collegemt;8626956]How long until the N55 accessport is released.

+1
Appreciate 0
      01-05-2011, 09:09 PM   #14
cwg
Captain
45
Rep
723
Posts

Drives: 2017 M4 ZCP. AZB on black
Join Date: Nov 2010
Location: Kailua, HI

iTrader: (0)

Quote:
Originally Posted by onefastman View Post
Those numbers seem pretty low. So for 900 we get a delta of 30-40hp?
The delta on the 335i dyno is double - 63 Hp and 90lbs on 91 octane - Would like to hear why the 135i gains are 50% of the 335i gains
Appreciate 0
      01-05-2011, 09:11 PM   #15
Dannydeleted
Private
Dannydeleted's Avatar
United_States
4
Rep
83
Posts

Drives: Subaru STi
Join Date: Dec 2010
Location: Fountain Valley

iTrader: (0)

Quote:
Originally Posted by collegemt View Post
How long until the N55 accessport is released.

Are we looking at 3 months or more like 12 months?
Quote:
Originally Posted by collegemt View Post
How long until the N55 accessport is released.

+1
As soon as I get a more accurate ETA on things, I'll be able to let you all know. But we do have a 2011 135i in our hands and *some* testing was done yesterday inbetween tunes. Coming soon!!!!! *dun dun dun*
Appreciate 0
      01-05-2011, 09:12 PM   #16
MikesBMW
Banned
United_States
318
Rep
1,410
Posts

Drives: X3 M40i
Join Date: Jul 2010
Location: Ohio

iTrader: (1)

Garage List
2019 BMW X3 M40i  [0.00]
2017 BMW X1  [0.00]
Can we get a group buy????
Appreciate 0
      01-05-2011, 09:12 PM   #17
Dannydeleted
Private
Dannydeleted's Avatar
United_States
4
Rep
83
Posts

Drives: Subaru STi
Join Date: Dec 2010
Location: Fountain Valley

iTrader: (0)

Quote:
Originally Posted by cwg View Post
The delta on the 335i dyno is double - 63 Hp and 90lbs on 91 octane - Would like to hear why the 135i gains are 50% of the 335i gains
Hm...I'll look into that for you.
Appreciate 0
      01-05-2011, 09:22 PM   #18
Shaggykjb_135I
Private
Shaggykjb_135I's Avatar
United_States
3
Rep
59
Posts

Drives: Sedonna Red 135 6spd. loaded.
Join Date: Nov 2010
Location: Central Texas

iTrader: (0)

Garage List
2008 135i  [0.00]
Is their a warranty with the product? and will their be "hardware" performance parts made by cobb? (ex: intercooler,ssk,)
Appreciate 0
      01-05-2011, 09:23 PM   #19
MikesBMW
Banned
United_States
318
Rep
1,410
Posts

Drives: X3 M40i
Join Date: Jul 2010
Location: Ohio

iTrader: (1)

Garage List
2019 BMW X3 M40i  [0.00]
2017 BMW X1  [0.00]
they warranty their product, they will probably have some basic maps for the general mods people do
Appreciate 0
      01-05-2011, 09:26 PM   #20
J5isalive
Private First Class
49
Rep
132
Posts

Drives: '20 M2C, '15 GT3
Join Date: Aug 2010
Location: Alpharetta Ga

iTrader: (1)

seems very low.... (power wise)
Appreciate 0
      01-05-2011, 09:32 PM   #21
collegemt
Private First Class
collegemt's Avatar
16
Rep
102
Posts

Drives: 2011 135i 6MT
Join Date: Aug 2010
Location: Aurora CO

iTrader: (3)

Quote:
Originally Posted by maxnix View Post
Probably not long after he gets my car in.
When is your car going in?

I got the money saved and will purchase as soon as it is availible.
__________________
2011 135i 6mt
Appreciate 0
      01-05-2011, 09:37 PM   #22
Dannydeleted
Private
Dannydeleted's Avatar
United_States
4
Rep
83
Posts

Drives: Subaru STi
Join Date: Dec 2010
Location: Fountain Valley

iTrader: (0)

Quote:
Originally Posted by Shaggykjb_135I View Post
Is their a warranty with the product? and will their be "hardware" performance parts made by cobb? (ex: intercooler,ssk,)
Quote:
Originally Posted by MB135i View Post
they warranty their product, they will probably have some basic maps for the general mods people do
Yes we do.

Hard parts will be discussed when the appropriate time is right.

As far as further map development, they're along the way!
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:54 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST