BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      08-20-2012, 07:12 PM   #1
blutattoo
First Lieutenant
22
Rep
380
Posts

Drives: 2012 135i
Join Date: Jun 2012
Location: Sacramento

iTrader: (1)

Garage List
2012 BMW 135i  [0.00]
Money no object Susp. upgrades?

If cost was not a consideration what suspension setup would you choose for the ultimate street/autocross/track setup for a 135? Tires not withstanding, because that's a whole other ball of wax.

Everyone has an opinion, but I'd love to get an idea of what I should shoot for.

I autocross frequently and am willing to deal with a little stiffer suspension than some, but don't want a total compromise of ride quality.

I find the current setup ill prepared for autocross. Tons of understeer which I'd love to do away with (although driver error has a lot to do with that as well).

Thanks for any input.

Current setup
2012 135i M pkg 6mt
Dinan Stage 1 suspension
Apex 18's w/PSS 235/40/18 265/35/18
BMS Intake
BMW Perf exhaust
Dinan Stage 2 tune
Appreciate 0
      08-20-2012, 10:00 PM   #2
yaymitch
Major
yaymitch's Avatar
863
Rep
1,246
Posts

Drives: 2020 M2CS & 2022 RSQ8
Join Date: Jul 2008
Location: Houston

iTrader: (2)

See my sig for all the new susp mods I got. Ride is same, not much harsher at all. Gone is body roll and much less understeer. Jury is still out as I am waiting for cooler weather before AutoX and track time.
__________________
2020 BMW M2CS HS 6MT
2022 Audi RSQ8
Appreciate 0
      08-21-2012, 12:03 AM   #3
flinchy
Brigadier General
124
Rep
3,099
Posts

Drives: E82 135i
Join Date: Nov 2011
Location: QLD, Australia

iTrader: (0)

Ohlins

Still reasonably ish priced, but $2500pp plus install for the base models.. isn't cheap.. Look exponentially more for higher spec stuff. Serious track gear though.
Appreciate 0
      08-21-2012, 12:28 AM   #4
jsmonet
Captain
United_States
302
Rep
913
Posts

Drives: 2020 x7 m50i
Join Date: Nov 2011
Location: so cal

iTrader: (2)

ohlins.

because... ohlins.

if your roads are crap like mine, stay with the standard springs. if they're reasonably smooth, talk to HPautowerke and let them talk you into some swift springs.
Appreciate 0
      08-21-2012, 01:35 AM   #5
blutattoo
First Lieutenant
22
Rep
380
Posts

Drives: 2012 135i
Join Date: Jun 2012
Location: Sacramento

iTrader: (1)

Garage List
2012 BMW 135i  [0.00]
Quote:
Originally Posted by yaymitch View Post
See my sig for all the new susp mods I got. Ride is same, not much harsher at all. Gone is body roll and much less understeer. Jury is still out as I am waiting for cooler weather before AutoX and track time.
I like the thought of the M3 bit's but have heard mixed reviews about the front suspensions components when it comes to understeer on the track. I read a couple of posts that suggested it actually increased understeer in autox even though it made the car much flatter when turning. I'm not sure it would make me quicker on the track, but probably a vast improvement over stock during normal spirited driving.

I guess if you consider BMW has a multi-million dollar r&d budget. The suspension bits are about as good as they're gonna get.

What about coil-overs or spring/shock combos? The M3 parts will break the bank for me, but it'll be nice to have something to shoot for.
Appreciate 0
      08-21-2012, 03:01 AM   #6
flinchy
Brigadier General
124
Rep
3,099
Posts

Drives: E82 135i
Join Date: Nov 2011
Location: QLD, Australia

iTrader: (0)

Quote:
Originally Posted by blutattoo
Quote:
Originally Posted by yaymitch View Post
See my sig for all the new susp mods I got. Ride is same, not much harsher at all. Gone is body roll and much less understeer. Jury is still out as I am waiting for cooler weather before AutoX and track time.
I like the thought of the M3 bit's but have heard mixed reviews about the front suspensions components when it comes to understeer on the track. I read a couple of posts that suggested it actually increased understeer in autox even though it made the car much flatter when turning. I'm not sure it would make me quicker on the track, but probably a vast improvement over stock during normal spirited driving.

I guess if you consider BMW has a multi-million dollar r&d budget. The suspension bits are about as good as they're gonna get.

What about coil-overs or spring/shock combos? The M3 parts will break the bank for me, but it'll be nice to have something to shoot for.
M3 front bits (control arm tension rod etc.) will 100% help, no way are they worse than stock
Appreciate 0
      08-21-2012, 04:08 AM   #7
cooler2442
Brigadier General
476
Rep
4,153
Posts

Drives: 1/18 Monte Carlo Blue E92 M3
Join Date: Apr 2011
Location: Los Angeles

iTrader: (6)

Garage List
Money no object?

ER Front Widebody conversion. Then run 285's square. Get full M3 bits + Ohlin's or Moton's. LSD as well.
Appreciate 0
      08-21-2012, 06:24 AM   #8
John_01
Colonel
John_01's Avatar
Australia
232
Rep
2,643
Posts

Drives: E90 325i, E82 135i
Join Date: Mar 2009
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by blutattoo View Post
I like the thought of the M3 bit's but have heard mixed reviews about the front suspensions components when it comes to understeer on the track. I read a couple of posts that suggested it actually increased understeer in autox even though it made the car much flatter when turning. I'm not sure it would make me quicker on the track, but probably a vast improvement over stock during normal spirited driving.

I guess if you consider BMW has a multi-million dollar r&d budget. The suspension bits are about as good as they're gonna get.
Unfortunately not the case. The bushings in the front suspension arms are very soft. Its because they are designed for run-flat tires. It is possible to upgrade to aftermarket bushings without changing the front suspension arms. The M3 arms include proper rubber bushings and also give increased negative camber. This small amount of negative front camber makes a really big difference to the handling over stock in a street driving scenario - MUCH LESS understeer! If you want to really dial-out understeer in autox, you will probably want to get camber plates to get even more negative camber. Although I don't run autox, I would say that camber plates + upgraded tension strut bushings is an alternative to the M3 front arm kit.
Appreciate 0
      08-21-2012, 06:41 AM   #9
Pig Farmer
Major
340
Rep
1,293
Posts

Drives: E92M
Join Date: May 2010
Location: Florida

iTrader: (0)

Quote:
Originally Posted by cooler2442 View Post
Money no object?

ER Front Widebody conversion. Then run 285's square. Get full M3 bits + Ohlin's or Moton's. LSD as well.
+1
Appreciate 0
      08-21-2012, 07:25 AM   #10
pixelblue
Colonel
pixelblue's Avatar
140
Rep
2,234
Posts

Drives: the silver bullet
Join Date: Feb 2010
Location: northern virginia

iTrader: (2)

Garage List
2010 135i  [8.90]
Quote:
Originally Posted by cooler2442 View Post
Money no object?

ER Front Widebody conversion. Then run 285's square. Get full M3 bits + Ohlin's or Moton's. LSD as well.
+2
__________________
"I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"
Appreciate 0
      08-21-2012, 08:00 AM   #11
BrokenVert
Resident Kerbalnaut
BrokenVert's Avatar
United_States
477
Rep
10,703
Posts

Drives: Topless Brute/Hybrid Boogaloo
Join Date: Apr 2009
Location: Fahrvergnügen/NY

iTrader: (0)

I'm hearing a lot of talk about saving money for a money is no object thread.

Drop out the front and rear subframes and retrofit the frames from a 1M. It's not too much of a difference from all M3 parts in the front. But in the rear it completely changes the suspension geometry.

Do that - and ER kit up front + LSD and you'd be pretty set
__________________

Appreciate 0
      08-21-2012, 01:19 PM   #12
My135
Lieutenant Colonel
85
Rep
1,609
Posts

Drives:
Join Date: Mar 2008

iTrader: (0)

If money is no object, buy a Ferrari instead:-):-):-)
__________________
7/08 135 Coupe, Crimson Red, 6 SP, Sport, Taupe Lette/Aluminum. Performance Mods: JB4 on Map 5, BMS DP Fix V3, Injen polished intake, AR Catless DP, Maddad resonated mid-pipes, aFe exhaust polished tips, ST Suspension Coil Over and Hotchkis front sway bar. Others: BMS OCC, BT Scanner, Mud Flap. Next Mods: AA Front Strut Brace.
Appreciate 0
      08-21-2012, 01:44 PM   #13
blutattoo
First Lieutenant
22
Rep
380
Posts

Drives: 2012 135i
Join Date: Jun 2012
Location: Sacramento

iTrader: (1)

Garage List
2012 BMW 135i  [0.00]
I like the Ferrari idea, now where do I fit that pesky baby seat?!

Gonna order the bushings, dinan camber kit and m3 front suspension stuff this week. Then I'm gonna go hunting down some 996's hehe. This car is so quick in autox it's gonna be nice to get the backend to rotate. As is I'm only half second off the quickest 996's and a second and a half of the gt3's.

As for the ohlins well there on the to do list along with some seat time at willow springs and laguna seca.
Appreciate 0
      08-21-2012, 03:22 PM   #14
GaryS
Colonel
37
Rep
2,084
Posts

Drives: 2009 135i 6MT
Join Date: Feb 2010
Location: Maryland

iTrader: (0)

Garage List
2009 135i  [6.50]
Quote:
Originally Posted by blutattoo View Post
I like the Ferrari idea, now where do I fit that pesky baby seat?!

Gonna order the bushings, dinan camber kit and m3 front suspension stuff this week. Then I'm gonna go hunting down some 996's hehe. This car is so quick in autox it's gonna be nice to get the backend to rotate. As is I'm only half second off the quickest 996's and a second and a half of the gt3's.

As for the ohlins well there on the to do list along with some seat time at willow springs and laguna seca.
You'll get maximum -2.0 camber with Dinan + M3 parts. I promise, that's not enough for autocross or track. Get Ground Control or Vorshlag adjustable camber plates and either adjust them from -1.2 for street to -3.2 for track like I do or just set it to -3.2 and leave it that way like most people.
Appreciate 0
      08-21-2012, 05:30 PM   #15
modernbeat
Motorsports Engineer
modernbeat's Avatar
46
Rep
95
Posts

Drives: Caged
Join Date: Dec 2011
Location: Dallas, TX

iTrader: (0)

Money no object? Street and competition? Bilstein MDS doubles.
__________________
Jason McDaniel at Vorshlag
Appreciate 0
      08-21-2012, 06:30 PM   #16
Zombie1
Colonel
United_States
171
Rep
2,347
Posts

Drives: BMW 135i 2010
Join Date: Jul 2012
Location: Island long

iTrader: (6)

Quote:
Originally Posted by cooler2442 View Post
Money no object?

ER Front Widebody conversion. Then run 285's square. Get full M3 bits + Ohlin's or Moton's. LSD as well.
transformer lol
Appreciate 0
      08-21-2012, 06:33 PM   #17
yaymitch
Major
yaymitch's Avatar
863
Rep
1,246
Posts

Drives: 2020 M2CS & 2022 RSQ8
Join Date: Jul 2008
Location: Houston

iTrader: (2)

Quote:
Originally Posted by blutattoo View Post
I like the thought of the M3 bit's but have heard mixed reviews about the front suspensions components when it comes to understeer on the track. I read a couple of posts that suggested it actually increased understeer in autox even though it made the car much flatter when turning. I'm not sure it would make me quicker on the track, but probably a vast improvement over stock during normal spirited driving.

I guess if you consider BMW has a multi-million dollar r&d budget. The suspension bits are about as good as they're gonna get.

What about coil-overs or spring/shock combos? The M3 parts will break the bank for me, but it'll be nice to have something to shoot for.
I think the increased understeer is due to folks putting on the E9x sway bar on stock suspension, especially the E93 sway bar.
__________________
2020 BMW M2CS HS 6MT
2022 Audi RSQ8
Appreciate 0
      08-22-2012, 01:37 AM   #18
HP Autosport
Supreme Allied Commander
United_States
3774
Rep
54,154
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

I would do a full M3 suspension swap, front and rear, strut tower brace and all, adjustable rear toe arms, Ohlins R&T or JRZ RS1 and a good LSD.
Appreciate 0
      08-22-2012, 02:51 AM   #19
fboutlaw
Cone Cruncher
fboutlaw's Avatar
United_States
30
Rep
534
Posts

Drives: Dinan 135i
Join Date: Apr 2010
Location: Cupertino, CA

iTrader: (3)

Quote:
Originally Posted by HP Autowerks View Post
I would do a full M3 suspension swap, front and rear, strut tower brace and all, adjustable rear toe arms, Ohlins R&T or JRZ RS1 and a good LSD.
+3 (from others) on the full M3 suspension swap + Ohlins + LSD + ER Widebody

If you want to maintain comfort when not racing, keep the stock suspension (springs / shocks) and swap them back in.
Appreciate 0
      08-23-2012, 01:02 AM   #20
flinchy
Brigadier General
124
Rep
3,099
Posts

Drives: E82 135i
Join Date: Nov 2011
Location: QLD, Australia

iTrader: (0)

Quote:
Originally Posted by cooler2442
Money no object?

ER Front Widebody conversion. Then run 285's square. Get full M3 bits + Ohlin's or Moton's. LSD as well.
Dry of course

But really, 305 or go home

Can't imagine how wide it'd look from behind on our teeny cars

Lsd with shorter final drive allowed? ;p

Cant forget strut braces.. Arc or bmwp cf front, probably just a whiteline rear, and underbody etc. etc.
Appreciate 0
      09-01-2012, 03:54 PM   #21
Pyrat 2
Colonel
Pyrat 2's Avatar
United_States
1418
Rep
2,559
Posts

Drives: Rapidly from A to B
Join Date: Jun 2005
Location: Chicago 'burbs or TN Smokies

iTrader: (3)

Garage List
Want to get rid of your understeer at the autox then you need some more negative camber and scratch the 235/265 tire setup. You need a square setup. Your car is almost perfect 50/50 front/rear weight balanced. Having a 235/265 setup is almost guaranteed to give you understeer no matter how much negative camber you dial in.

My recommendation is the dinan camber plates plus a set of wheels with 235 all around for the autocross track. The dinan camber plates are not adjustable which for me is a positive since some adjustable camber plates can be problematic over time.
__________________
'07 Z4MR '22 GT4 '18 GT3 '16 GT4, '16 M2, '14 X1, '13 135is, '06 330i, '03 323 Ci, '01 330i, '99 M3 (RIP), '96 318is, some non-BMWs
Appreciate 0
      09-01-2012, 05:45 PM   #22
flinchy
Brigadier General
124
Rep
3,099
Posts

Drives: E82 135i
Join Date: Nov 2011
Location: QLD, Australia

iTrader: (0)

Quote:
Originally Posted by HeelToe
Want to get rid of your understeer at the autox then you need some more negative camber and scratch the 235/265 tire setup. You need a square setup. Your car is almost perfect 50/50 front/rear weight balanced. Having a 235/265 setup is almost guaranteed to give you understeer no matter how much negative camber you dial in.

My recommendation is the dinan camber plates plus a set of wheels with 235 all around for the autocross track. The dinan camber plates are not adjustable which for me is a positive since some adjustable camber plates can be problematic over time.
235 is a bit narrow, even a 128 would struggle for traction
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:05 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST