|
|
|
05-07-2015, 12:05 PM | #1 |
Captain
99
Rep 604
Posts |
BBS Impuls 18x9 et35/18x10 et40
To start offset is 18x9 et35 front/ 18x10 et40 rear. I've had these for a year + and these have been meticulously cared for with chrome lips and gold hardware. I've got extra "BBS" valve stems and wheel logos sent to me straight from BBS USA in Ga. Onto the photos. 3000+ shipping w/out tires 3300+ shipping with hankook ventus v12 60-70% tread These were on John Zhang's 1 series also known as 1013mm so i know these will look gorgeous on a 1'er. Pm me any questions and thanks for looking. Last edited by troy2003; 05-20-2015 at 07:22 PM.. |
06-18-2015, 10:22 AM | #6 |
Colonel
171
Rep 2,347
Posts |
hey you bought these from 1013mm ? JW as he says the fronts are et38 just a heads up.
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
07-13-2015, 12:48 PM | #9 |
aka 1013MM
1249
Rep 9,545
Posts |
great to know these wheels are still around and doing great! GLWS!
__________________
|
Appreciate
0
|
12-13-2015, 01:52 PM | #11 |
Captain
152
Rep 984
Posts |
Dam tempted...did 1013mm have any spacers to get that look he has in his sig? And where in Florida are you and can you provide the tire specs?
__________________
2004E46M36MTCBCinn 'Clubsport'
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|