Any1 got experience with NSW/AUS laws around Xenons and AE (DRLs) brightness?

[jkho]

Hey guys,
Picked up a pair of Phillips X-tremevisions D1S Xenons (3200 lumens and 4800k) and now trying to find some updated AE's to match
https://www.1addicts.com/forums/show...7#post30927357

Is there a max lumens or kelvin temperature for a bulb to be deemed "roadworthy" ?
Would it be the same for both the D1S (Xenons) and the H8 (AE/DRLs) ?


Thanks for your help boys!!

[jkho]

So I finally did it... the darn air filter box was in the way on the passenger side... it was either that or the entire headlight unit needed to come off. (limited tools )
1x Xenon is still borked, might need to give the ballast a change over the next couple of weeks

Next on the list:

• *** DONE Blacked kidney grille (dual slat)
• *** DONE Ballast change (One Xenon still borked)
• *** DONE LED fogs
• *** DONE LED interior lights updated
• *** DONE LED dynamic side marker
• Full splitter kit (FlowDesigns Australia)
• *** DONE CF spoiler
• CF diffuser (M-Tech style with 3fins)
• Blackline Taillights - 63212225282
• *** DONE Exhaust tone update, muffler delete
• Some tuning, Stage1

Edit:
1st photo - PIAA Hyper Arros 5k Halogens vs Stock
2nd photo - Ended up going with some cheapie 8k LEDs from AliExpress