Alufelgen CS7 18x8.5/9.5 gunmetal w/ tires

[b00st]

BIMMERPOST / Classifieds

Asking Price:

Sold

Location:

✓ Will Ship

Item Interest

SOLD SOLD SOLD SOLD

I got rid of my car, so the wheels are for sale. I'm willing to ship, but the buyer pays all shipping costs (if you've never had wheels shipped, be aware that this could be around $150). I'm located in metro Detroit though, so buyers willing to do local pickup get preference here. PM me if there are any questions, and that will probably get the quickest answer. Any specific pictures needed, just ask.

Alufelgen CS-7 wheels, powder coated gunmetal - $800 obo + shipping

They are 18x8.5(+40)/18x9.5(+45). Slightly more aggressive than the usual setup with these wheels. I posted a picture of my car with them on, for a reference on fitment. I was slightly lowered in that picture and never rubbed once. No tire pressure sensors. I have the Alufelgen center caps, but these wheels originally were not a matching colored set(fronts and rears were from two different sets), so the center caps are 2 different colors for front and rear. They take OEM center caps, so I always used those. These have Sumitomo HTR ZIII tires mounted in 225/40/18, and 255/35/18. They have seen a few summer seasons of daily driving, and the rears would get you around for a while but will probably need to be replaced this year. The fronts have a little more life in them. Keep in mind these were my daily driver summer wheels for a few seasons, so there is no curb rash, but they have small little blemishes just from being driven around town.

[ShocknAwe]

Offset can be found on the back of the wheel. GLWS!

[b00st]

Originally Posted by ShocknAwe

Offset can be found on the back of the wheel. GLWS!

Yah, I know it normally is, but it looks like the markings wore off unfortunately (might have something to do with when they got powder coated). I found where it says "ET" like normal, but after that I can't see anything. That's why I figured I'd just post the picture of them mounted on my car.

[neverdone]

What were you lowered on?

[Russiandl]

Pm'D

[spxxx]

Let us know the offset... Specifically the rears

[InAHurry]

what was the original finish?

[b00st]

Originally Posted by neverdone

What were you lowered on?

I was lowered on Megan Racing coilovers, but they were not put down all the way. I ran these wheels on stock suspension for 2 years, and 1 year on the coilovers without any fit issues or rubbing ever. I have driven the car with 4 adults and no issues, but like I said, I am not slammed or anything.

Originally Posted by Russiandl

Pm'D

PM returned

Originally Posted by spxxx

Let us know the offset... Specifically the rears

As I said, I wish I could remember them exactly. Just going off memory, I want to say it was +40 in the front, and +45 in the rear though. I never paid attention to the markings on the inside of the wheel, but I'm guessing the offset markings got filled in during powder coating. The best I can do unfortunately is show the picture of my car with them mounted. When the vendor sold these to me, they said this would for sure fit, but they wouldn't go with too wide of a tire in the rear if the car was lowered.

Originally Posted by InAHurry

what was the original finish?

I don't remember which is which, but these are the center caps showing the two different finishes originally:

[b00st]

I was able to verify the offset on the wheels for everyone that was asking, and I was correct that it's +40 front/ +45 rear. Here are some additional pictures I took after cleaning the wheels.

[totti84]

Will you post to 2153 Australia?

[b00st]

Originally Posted by totti84

Will you post to 2153 Australia?

Check the PM I sent you.

[b00st]

Morning bump. Several people interested, but still available for now.

[b00st]

Morning bump. Updated first post to reflect the correct offsets.