**********s l AEM l **********s l AEM l Methanol Injection Kit N54

[ModBargains.com]

Water / Methanol Injection Kits:
AEM Water/Methanol Injection Kits reduce air inlet temperatures which allows users to increase boost pressure (and advance timing on forced induction gas applications) to create more power by utilizing the cooling effects of the system under heavy load. The kit is offered in 2 configurations: a 1-Gallon kit for racecar applications, and a 5- Gallon HD kit for Diesel applications or racecars requiring extended range. Both kits include all the elements necessary to do water/methanol injection right, including a standard fluid level sensor for the tank, recirculation-style pump, feature-loaded controller, and complete hardware for installation on practically any diesel or gas application. For users who intend to use a custom or existing reservoir, AEM also offers a “tankless” pump and jet kit. There are no hidden costs or additional components required.

[IMG]http://www.**********s.com/images/Products/AEM%20Meth%20Kit/30-3000_med.jpg[/IMG] [IMG]http://www.**********s.com/images/Products/AEM%20Meth%20Kit/30-3001_med.jpg[/IMG]

How it Works:
Once the AEM Water/Methanol Kit is installed, a boost-dependent, variable-flow progressive controller allows the user to determine the amount of water/methanol mixture (up to 50%) to feed into the inlet stream from the fluid reservoir. The controller commands a high-pressure, recirculation-style 150-PSI pump that delivers the mixture. Overall flow adjustments at the inlet are made via one of three different-sized jets (included) that are designed to match most engine power requirements.

[IMG]http://www.**********s.com/images/Products/AEM%20Meth%20Kit/water_inj_diagram.jpg[/IMG]

Is it Compatible with my Tuner?
Yes! For all the tuner fans out there this kit is compatible with all the major tuning kits such as Burger Tuning, Proceed Vishnu, RD Sport, Alpina and especially the most popular JB3. This Meth Kit works with your JB3 or other tuner in order to give you maximum results. Race gas can be very expensive and very unpractical for daily drivers. By injecting a steady stream of mist into your intake it makes the air going into your combustion camber very combustible, mimicking a higher octane fuel such as 110 octane race fuel. With the added increase in octane you can now run higher maps on your JB3, this allows you to get even more horsepower on top of just running AEM's Meth Kit. Reaching gains up to 60 wheel horsepower depending on tuner settings.

Recirculation-Style Pump:
AEM's recirculation-style pump offers improved performance, reliability and a much smoother, quieter operation when compared to older switched-style pumps. With the use of a new internal bypass design, AEM's upgraded pump eliminates erratic on and off switching/pulsing and ensures consistent fluid delivery for optimum performance. With durability and reliability in mind, AEM has designed the pump with a Santoprene diaphragm and EPDM seals to withstand the harshest of alcohol mixes.

BOOST SAFE!
All AEM Water/Methanol controllers include a Boost Safe feature. This feature allows users to reduce timing or reduce boost via a ground output if the system runs out of fluid or detects a controller error, ensuring fail-safe operation of the engine whether the system is engaged or not. Critical safety features are integrated into the system to virtually eliminate any chance of failure, including an integral fluid level sensor in the reservoir, internal controller diagnostics and an LED dash light to warn of low fluid level or error codes (including short circuits.)

Why Should I Choose AEM's Methanol Kit Over Others?
Unlike other comparable Methanol Kits, AEM has spent years in research and development making sure every aspect of this kit was addressed. This Meth Kit is not only designed to work perfectly with any forced induction vehicle, but one if its largest benefits is its versatility. It is much smaller and compact then other kits on the market. The one gallon kit can be mounted on the side of your trunk, only using a small amount of room. It can also be mounted anywhere in your BMW where there is room for a one gallon tank. The kit comes with plenty of hose length to fit any style of application.

Pricing:
1- Gallon Tank - $394.95
5- Gallon Tank - $490.95

Additional Optional Parts:
Water/Methanol Injection Filter - $28.95
Flow Gauge (Black or White)- $219.95

Videos:

[u2b]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/XNIjps6bwqs&hl=en_US&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/XNIjps6bwqs&hl=en_US&fs=1" type="application/x-shockwave-flash" width="425" height="344" allowscriptaccess="always" allowfullscreen="true"></embed></object>[/u2b]

[u2b]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/oBZAAXZIEn0&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/oBZAAXZIEn0&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/u2b]

[u2b]<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/W144mgUDySI&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/W144mgUDySI&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>[/u2b]


Give me a call here at ************** ext 8006 if you have any questions!

Alan

[ModBargains.com]

All Pms replied thanks !