|
|
|
02-24-2014, 10:48 AM | #1 |
zzzzzzzzz
17
Rep 124
Posts |
Best Launch RPM
ust installed my 2-Step/NLS and I'm wondering what RPM do you guys set yours at? Or even what do all you guys without 2-Step launch your car around? Just gauging results. Thanks
Dustin |
03-26-2014, 12:18 AM | #2 |
Colonel
171
Rep 2,682
Posts |
Launch RPMs for a 2 step depends on your grip predominantly but also the level of power you have.
If you have infinite grip then you would set the 2 step at near full boost levels however if you're on simple road tyres then it really depends on how much power you have to overcome those levels of grip. Set the RPMs too high and you'll overpower the grip and just spin like crazy, ending up with crappy 60ft times. I'm FBO with meth running max 20psi of boost in the midrange with street tyres. I don't even use the 2 step because I spin the tyres launching at 2-2.5k RPMs whilst not even dumping the clutch. The tyres then proceed to spin all the way through 1st and then 2nd gear unless I go easy on the throttle. The only reason I don't launch at lower RPMs is due to the risk of bogging. If you are running less power with grippy street tyres then maybe you can use the 2 step function. The only way you can find your optimal launch RPMs would really be through trial and error. Maybe start at around 3500 RPMs and see how that goes. If you get too much wheel spin then your drop it by 500 RPM increments until you feel happy and your 60fts improve and vice versa if you are bogging or not launching fast enough.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|