Detailer's Domain: Porsche Cayenne Turbo S - Polish

Detailers Domain · 11-10-2009, 03:25 PM

Porsche Cayenne Turbo S - this SUV was in pretty good shape. However it needed a thorough cleaning including wheels, clay, and water spot removal. A light polish with Menzerna PO106FA and Swissvax Divine for the last step.

Prior to the last step the customer wanted to wrap the front clip with PPF (Full Hood, Fender, Bumper, Mirrors, A Pillars)

Take a look:

Products used:
Exterior:
Einszett Blitz
Lusso AutoBathe
Uber Yellow Wash Sponge
Swissvax Yellow Clay Bar and Optimum Instant Detail Spray and Gloss Enhancer
Einszett Spray Wax
Menzerna PO106FA
Swissvax Divine

Wheels and tires:
Einszett Wheel Cleaner
Swissvax Wheel Brush
Uber Wheel Brush
Uber Spoke Brush
Swissvax Pneu
Swissvax Autobahn

Tools:
Infratech 5300
Flex 3403
The Uber Foam Pads (5.5inch)
Tons of "Uber" Microfiber Towels
Uber Drying Towels
Brushes
Cam Spray and Cam Spray Foam Canon

Before pics of this dirty beast.

Presoak with Einszett Blitz to remove bug and tar

Presoak with P21S Wheel Cleaner

Dan blasting out the wheel wells with the Cam Spray

Next the wheels were washed up

The car is now ready for foam

Rinse cycle

Dan claying the Cayenne

After shot of the Clay

Rinse down after claying

Shots prior to polishing (after claying) under a halogen

Under the Fenix

After the polishing with PO106FA
Halogen

Fenix

Swissvax Autobahn on the wheels

Tommy removing the Swissvax Autobahn

After polishing shots

Rinse prior to the PPF installation
Bumper installation

Final bumper

Fender strips

Hood install

Final touches on the hood

Fender install

After PPF

Final shots of the complete car

Sorry no sun in fact it was raining when the customer picked up.

anthony @ eas · 11-10-2009, 04:31 PM

Wow you guys did a good job. Each time I see pics of a clear bra install I almost pass out thinking of how frustrating it must be. Well done.

supraking · 11-11-2009, 08:48 PM

Nice job guys! I was wondering, do you just use a regular pressure washer with soap distributor to foam down the car, or is there a specific tool you can recommend? I tried my pressure washer out but couldn't get enough suds to actually stick/cover the car, they would just slide off with the water. Suggestions?

Detailers Domain · 11-11-2009, 08:52 PM

Quote:

Originally Posted by supraking

Nice job guys! I was wondering, do you just use a regular pressure washer with soap distributor to foam down the car, or is there a specific tool you can recommend? I tried my pressure washer out but couldn't get enough suds to actually stick/cover the car, they would just slide off with the water. Suggestions?

sure thing thanks! this is what we use.

http://www.detailersdomain.com/pressurewasher.aspx

11-10-2009, 03:25 PM	#1
Detailers Domain Major General 1995 Rep 6,916 Posts Drives: 20 M2C / 22 X3MC Join Date: Nov 2008 Location: New Jersey iTrader: (24)	Detailer's Domain: Porsche Cayenne Turbo S - Polish - PPF Install Porsche Cayenne Turbo S - this SUV was in pretty good shape. However it needed a thorough cleaning including wheels, clay, and water spot removal. A light polish with Menzerna PO106FA and Swissvax Divine for the last step. Prior to the last step the customer wanted to wrap the front clip with PPF (Full Hood, Fender, Bumper, Mirrors, A Pillars) Take a look: Products used: Exterior: Einszett Blitz Lusso AutoBathe Uber Yellow Wash Sponge Swissvax Yellow Clay Bar and Optimum Instant Detail Spray and Gloss Enhancer Einszett Spray Wax Menzerna PO106FA Swissvax Divine Wheels and tires: Einszett Wheel Cleaner Swissvax Wheel Brush Uber Wheel Brush Uber Spoke Brush Swissvax Pneu Swissvax Autobahn Tools: Infratech 5300 Flex 3403 The Uber Foam Pads (5.5inch) Tons of "Uber" Microfiber Towels Uber Drying Towels Brushes Cam Spray and Cam Spray Foam Canon Before pics of this dirty beast. Presoak with Einszett Blitz to remove bug and tar Presoak with P21S Wheel Cleaner Dan blasting out the wheel wells with the Cam Spray Next the wheels were washed up The car is now ready for foam Rinse cycle Dan claying the Cayenne After shot of the Clay Rinse down after claying Shots prior to polishing (after claying) under a halogen Under the Fenix After the polishing with PO106FA Halogen Fenix Swissvax Autobahn on the wheels Tommy removing the Swissvax Autobahn After polishing shots Rinse prior to the PPF installation Bumper installation Final bumper Fender strips Hood install Final touches on the hood Fender install After PPF Final shots of the complete car Sorry no sun in fact it was raining when the customer picked up.
	Appreciate 0 Tweet Quote

11-10-2009, 04:31 PM	#2
anthony @ eas 307 Rep 3,635 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	Wow you guys did a good job. Each time I see pics of a clear bra install I almost pass out thinking of how frustrating it must be. Well done.
	Appreciate 0 Quote

11-11-2009, 08:48 PM	#3
supraking Captain 49 Rep 759 Posts Drives: 128i Coupe 6MT Join Date: Apr 2009 Location: Montreal iTrader: (0) Garage List 2009 128i Coupe [0.00]	Nice job guys! I was wondering, do you just use a regular pressure washer with soap distributor to foam down the car, or is there a specific tool you can recommend? I tried my pressure washer out but couldn't get enough suds to actually stick/cover the car, they would just slide off with the water. Suggestions?
	Appreciate 0 Quote