Help! Cheap place to get wheels painted????

[UR25IO]

Does anyone here know where is the most cheapest place to get my stock wheel sand blasted,painted and baked professionally. In SYDNEY?
Tyres are already off.
These are my spare wheels. Dont want to spend a hug amount of money on these nuggets :P

[froop]

I go to Peter at Custom Wheels in Lansvale. $100/wheel and for me he usually removes and replaces the tyre and rebalances as well for no extra cost. He'll check for wheel buckling as well and can also repair that too. When I repainted my stock wheels. All 4 were mildly to moderately buckled. He charged me $700 to paint and unbuckle all 4 wheels. Price included all tyre removal, fitting and rebalancing.

[Chandon]

I got my wheels painted by a dude in Hoxton Park for $60 per wheel.

[UR25IO]

Originally Posted by froop

I go to Peter at Custom Wheels in Lansvale. $100/wheel and for me he usually removes and replaces the tyre and rebalances as well for no extra cost. He'll check for wheel buckling as well and can also repair that too. When I repainted my stock wheels. All 4 were mildly to moderately buckled. He charged me $700 to paint and unbuckle all 4 wheels. Price included all tyre removal, fitting and rebalancing.

hahah Alex.. I did want to spend more than $200ish
I went down that track of getting my stock wheel painted for $800 all wheels.

Originally Posted by viciousgook

I got my wheels painted by a dude in Hoxton Park for $60 per wheel.

Humm down the road from me. Do you know if they do sandblusting, old powder coat need to be remove as its flaking off due to stupied careless tyre fitters.

[John_01]

Low quality wheel refinishing can really suck. If there is the slightest bit of damage, you will be best off to get them sand blasted and finished properly. Otherwise the paint will start coming off way too soon.

[Chandon]

Originally Posted by UR25IO

hahah Alex.. I did want to spend more than $200ish
I went down that track of getting my stock wheel painted for $800 all wheels.



Humm down the road from me. Do you know if they do sandblusting, old powder coat need to be remove as its flaking off due to stupied careless tyre fitters.

Yup, he strips it down to bare metal and repaints it
His name is Mauro - 0418 613 566
It's his side job, so it's usually a couple more days turnover than a proper shop but he does it super cheap and it's quality work.

[UR25IO]

Originally Posted by John_01

Low quality wheel refinishing can really suck. If there is the slightest bit of damage, you will be best off to get them sand blasted and finished properly. Otherwise the paint will start coming off way too soon.

Fortunely these will be my spare track or get out of trouble wheels. Just what it to look reasonable and better than a standard home DIY from a spray can lol

Originally Posted by viciousgook

Yup, he strips it down to bare metal and repaints it
His name is Mauro - 0418 613 566
It's his side job, so it's usually a couple more days turnover than a proper shop but he does it super cheap and it's quality work.

Thanks viciousgook
when the time comes ill give him a buzz.
The turnover is not a major concern for me.. as long its not months on end