will it fit?

Trptguy · 02-20-2014, 10:32 AM

will a 19x9.5 et42-48 fit in the rear of a 135i?

Mountain135 · 02-20-2014, 10:49 AM

http://www.1010tires.com/Tools/Wheel...ulator#Results

Trptguy · 02-20-2014, 10:53 AM

yeah i did that but not sure if it will fit in the real world without some modifications

Greg FEightytwo · 02-20-2014, 11:15 AM

19x9.5 et50 with 1.5 springs rolled and pulled fenders rubs some.. that offset will most likely stick out.

Trptguy · 02-20-2014, 11:35 AM

shit that sux

VMRWheels · 02-20-2014, 12:32 PM

It depends on the tire sizing that you're using. With a 245/30/19 it could probably work.

Eyeman · 02-20-2014, 06:37 PM

Tons of us are running 19x9.5 et45. It does poke out. If the wheels are great I'd still consider it. Just means you are gonna have to work with rubbing issues.

Trptguy · 02-20-2014, 09:22 PM

do you have any pics of your setup?

VMRWheels · 02-21-2014, 04:09 PM

Should fit similarly to this, but in 19" sizing.

Eyeman · 02-21-2014, 06:35 PM

There are tons of pics of similar wheels on the site. From certain angles they will looked too poked out. If you get them tucked under the fenders with camber, stretched tires, etc it looks fine. I'm running tires that run wider now and had to raise my suspension a little higher and I still rub.

Trptguy · 02-21-2014, 06:46 PM

Ok that doesn't look terrible

Trptguy · 02-24-2014, 09:42 PM

Ok last question

19x8.5 et48 front
19x10 et52 rear

Will those fit?

Fifty3bags · 02-25-2014, 06:50 AM

Quote:

Originally Posted by Trptguy

Ok last question

19x8.5 et48 front
19x10 et52 rear

Will those fit?

The 19x10 et52 would be basically the same as a 19x9.5 et45. It will poke out around 1.5mm more.

bmw5858 · 02-25-2014, 07:10 AM

I just ordered vmr v710 19x8.5 +45 front with 225-35-19 and 19x9.5 +50 with 255-30-19. Will it be okay?

Eyeman · 02-25-2014, 09:22 AM

Front 19x8.5et48 will probably rub the strut. 4ish mm spacer will fix it.

Rear 19x10 et 52 would poke out 5.7 mm further than 19x9.5 et45 by my head calculations, there is a good calculator on the E90 side of this website.

BMW5858, that should work great depending a tad on your suspension and the tires chosen.

bmw5858 · 02-25-2014, 09:29 AM

For now suspension is stock... Don't know with what go! Coilspring + damper or coilover. Tire, I saw khumo in special.. But tempered in Michelin pilot..! What would you suggest for suspension?

Trptguy · 02-25-2014, 09:59 AM

Quote:

Originally Posted by Eyeman

Front 19x8.5et48 will probably rub the strut. 4ish mm spacer will fix it.

Rear 19x10 et 52 would poke out 5.7 mm further than 19x9.5 et45 by my head calculations, there is a good calculator on the E90 side of this website.

BMW5858, that should work great depending a tad on your suspension and the tires chosen.

good to hear. Yeah I used a calculator and that is about right. I think I am going to need to roll the fenders no matter what.

VMRWheels · 02-25-2014, 11:58 AM

Quote:

Originally Posted by bmw5858

I just ordered vmr v710 19x8.5 +45 front with 225-35-19 and 19x9.5 +50 with 255-30-19. Will it be okay?

On stock suspension, you should be good.

Greg FEightytwo · 02-25-2014, 12:13 PM

I have the wheels that VMRWheels is recommending 710s.. I'm running hankooks.. 265 rear.. Tread width is 9.4 still fits with rolled and pulled fenders dropped on 1.5 springs. full m3 suspension. maxed out camber. They were rubbing with yokohama s drives tread width 9.1 but the shoulder was too fat. PSS will rub bad because they have extra meat on them. VMR has a new wheel with et58.. I would get those in a heartbeat... Pictures of my car in the profile.

bmw5858 · 02-25-2014, 12:52 PM

Quote:

Originally Posted by gs135is

I have the wheels that VMRWheels is recommending 710s.. I'm running hankooks.. 265 rear.. Tread width is 9.4 still fits with rolled and pulled fenders dropped on 1.5 springs. full m3 suspension. maxed out camber. They were rubbing with yokohama s drives tread width 9.1 but the shoulder was too fat. PSS will rub bad because they have extra meat on them. VMR has a new wheel with et58.. I would get those in a heartbeat... Pictures of my car in the profile.

So you suggest to get hankook tire, and I will go with 255 tire to be sure. If I want more hellaflush with rolled fender, I'll just add a spacer.

Trptguy · 02-25-2014, 01:09 PM

so i am saying screw it all and am going to make the car fit the wheels….that's the way to go right?

Fifty3bags · 02-25-2014, 01:12 PM

If that's what you want to do. I will be running 18x9.5 et42 on the rear of mine. That's less aggressive than some have run, so I think you should be good as long as you don't mind rolling/pulling/shaving your fenders and bumper tabs

02-20-2014, 10:32 AM	#1
Trptguy Lieutenant 26 Rep 493 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	will it fit? will a 19x9.5 et42-48 fit in the rear of a 135i? Last edited by Trptguy; 02-20-2014 at 10:47 AM..
	Appreciate 0 Tweet Quote

02-20-2014, 10:49 AM	#2
Mountain135 Private First Class 16 Rep 107 Posts Drives: 2008 135 Coupe Join Date: Mar 2013 Location: Colorado iTrader: (0)	helpful site to check http://www.1010tires.com/Tools/Wheel...ulator#Results __________________ 2008 135i- Sparkling Graphite-Steptronic ESS Stage 3 Flash-BMS Dual Cones-Helix Intercooler-AR Design Catless Downpipe-Berk DP Back Full Street Exhaust-AR Design Oil Cooler-AR Design Catch Can-OS Giken LSD-Bilstein B12 Kit-Whiteline rear sub-frame bushing inserts. 225-255 Direzza Z2.
	Appreciate 0 Quote

02-20-2014, 10:53 AM	#3
Trptguy Lieutenant 26 Rep 493 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	yeah i did that but not sure if it will fit in the real world without some modifications
	Appreciate 0 Quote

02-20-2014, 11:15 AM	#4
Greg FEightytwo Major 1313 Rep 1,183 Posts Drives: BMW GT4 M4 and X5M Join Date: Apr 2013 Location: Nor Cal iTrader: (2)	19x9.5 et50 with 1.5 springs rolled and pulled fenders rubs some.. that offset will most likely stick out.
	Appreciate 0 Quote

02-20-2014, 11:35 AM	#5
Trptguy Lieutenant 26 Rep 493 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	shit that sux
	Appreciate 0 Quote

02-20-2014, 12:32 PM	#6
VMRWheels General 2042 Rep 25,989 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	It depends on the tire sizing that you're using. With a 245/30/19 it could probably work. __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Quote

02-20-2014, 06:37 PM	#7
Eyeman Colonel 121 Rep 2,037 Posts Drives: 2008 135 blk, blk, step Join Date: Jan 2009 Location: Atlanta, GA iTrader: (0) Garage List 1994 Porsche 968 Cab [0.00] 2017 AMG GTS [0.00] 1994 Porsche 968 Coupe [0.00] 1977 Mercedes 450SE ... [0.00] 2008 135 [8.00]	Tons of us are running 19x9.5 et45. It does poke out. If the wheels are great I'd still consider it. Just means you are gonna have to work with rubbing issues. __________________ Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, PSS4S 225/35fr 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, iCarbon diffuser, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille, Andrey_GTA rear hub mod, Ebay Mstyle front bumper and performance style side skirts.
	Appreciate 0 Quote

02-20-2014, 09:22 PM	#8
Trptguy Lieutenant 26 Rep 493 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	do you have any pics of your setup?
	Appreciate 0 Quote

02-21-2014, 04:09 PM	#9
VMRWheels General 2042 Rep 25,989 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	Should fit similarly to this, but in 19" sizing. __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Quote

02-21-2014, 06:35 PM	#10
Eyeman Colonel 121 Rep 2,037 Posts Drives: 2008 135 blk, blk, step Join Date: Jan 2009 Location: Atlanta, GA iTrader: (0) Garage List 1994 Porsche 968 Cab [0.00] 2017 AMG GTS [0.00] 1994 Porsche 968 Coupe [0.00] 1977 Mercedes 450SE ... [0.00] 2008 135 [8.00]	There are tons of pics of similar wheels on the site. From certain angles they will looked too poked out. If you get them tucked under the fenders with camber, stretched tires, etc it looks fine. I'm running tires that run wider now and had to raise my suspension a little higher and I still rub. __________________ Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, PSS4S 225/35fr 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, iCarbon diffuser, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille, Andrey_GTA rear hub mod, Ebay Mstyle front bumper and performance style side skirts.
	Appreciate 0 Quote

02-21-2014, 06:46 PM	#11
Trptguy Lieutenant 26 Rep 493 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	Ok that doesn't look terrible
	Appreciate 0 Quote

02-24-2014, 09:42 PM	#12
Trptguy Lieutenant 26 Rep 493 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	Ok last question 19x8.5 et48 front 19x10 et52 rear Will those fit?
	Appreciate 0 Quote

02-25-2014, 07:10 AM	#14
bmw5858 Lieutenant 193 Rep 495 Posts Drives: bmw 340i 2018 Join Date: Dec 2012 Location: Montreal iTrader: (0)	I just ordered vmr v710 19x8.5 +45 front with 225-35-19 and 19x9.5 +50 with 255-30-19. Will it be okay? __________________ Bmw 435M 2014 Convertible SOLD! Bmw 340i X drive 2018 New orange sunset, Manual transmission, M performance I & II, M performance front lip, side extension rear diffuser, tinted windows. : SOLD Back in old N55 love! Bmw 335 EBII M performance edition : ER Downpipes, VRSF Chargepipe, VRSF HD 6.5 Intercooler, BM3 Stage 2 93 octane, MPPSK, H&R Spring
	Appreciate 0 Quote

02-25-2014, 09:22 AM	#15
Eyeman Colonel 121 Rep 2,037 Posts Drives: 2008 135 blk, blk, step Join Date: Jan 2009 Location: Atlanta, GA iTrader: (0) Garage List 1994 Porsche 968 Cab [0.00] 2017 AMG GTS [0.00] 1994 Porsche 968 Coupe [0.00] 1977 Mercedes 450SE ... [0.00] 2008 135 [8.00]	Front 19x8.5et48 will probably rub the strut. 4ish mm spacer will fix it. Rear 19x10 et 52 would poke out 5.7 mm further than 19x9.5 et45 by my head calculations, there is a good calculator on the E90 side of this website. BMW5858, that should work great depending a tad on your suspension and the tires chosen. __________________ Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, PSS4S 225/35fr 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, iCarbon diffuser, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille, Andrey_GTA rear hub mod, Ebay Mstyle front bumper and performance style side skirts.
	Appreciate 0 Quote

02-25-2014, 09:29 AM	#16
bmw5858 Lieutenant 193 Rep 495 Posts Drives: bmw 340i 2018 Join Date: Dec 2012 Location: Montreal iTrader: (0)	For now suspension is stock... Don't know with what go! Coilspring + damper or coilover. Tire, I saw khumo in special.. But tempered in Michelin pilot..! What would you suggest for suspension? __________________ Bmw 435M 2014 Convertible SOLD! Bmw 340i X drive 2018 New orange sunset, Manual transmission, M performance I & II, M performance front lip, side extension rear diffuser, tinted windows. : SOLD Back in old N55 love! Bmw 335 EBII M performance edition : ER Downpipes, VRSF Chargepipe, VRSF HD 6.5 Intercooler, BM3 Stage 2 93 octane, MPPSK, H&R Spring
	Appreciate 0 Quote

02-25-2014, 12:13 PM	#19
Greg FEightytwo Major 1313 Rep 1,183 Posts Drives: BMW GT4 M4 and X5M Join Date: Apr 2013 Location: Nor Cal iTrader: (2)	I have the wheels that VMRWheels is recommending 710s.. I'm running hankooks.. 265 rear.. Tread width is 9.4 still fits with rolled and pulled fenders dropped on 1.5 springs. full m3 suspension. maxed out camber. They were rubbing with yokohama s drives tread width 9.1 but the shoulder was too fat. PSS will rub bad because they have extra meat on them. VMR has a new wheel with et58.. I would get those in a heartbeat... Pictures of my car in the profile. Last edited by Greg FEightytwo; 02-25-2014 at 12:25 PM..
	Appreciate 0 Quote

02-25-2014, 01:09 PM	#21
Trptguy Lieutenant 26 Rep 493 Posts Drives: '87 BMW 325ic, '08 BMW 135i Join Date: Jul 2011 Location: Littleton, MA iTrader: (0)	so i am saying screw it all and am going to make the car fit the wheels….that's the way to go right?
	Appreciate 0 Quote

02-25-2014, 01:12 PM	#22
Fifty3bags Captain 326 Rep 914 Posts Drives: 2010 135i Join Date: Apr 2013 Location: Chattanooga, TN iTrader: (2)	If that's what you want to do. I will be running 18x9.5 et42 on the rear of mine. That's less aggressive than some have run, so I think you should be good as long as you don't mind rolling/pulling/shaving your fenders and bumper tabs
	Appreciate 0 Quote