|
|
|
03-27-2015, 01:15 PM | #1 |
Colonel
171
Rep 2,347
Posts |
Slow leak from bead seal of tires.
hello gents I recently installed my summer set up after getting them powder coated. I have slow leaks from the bead of two tires. I was wondering it there is a quick fix for this? I know they have bead sealer but that requires taking rims off car and breaking the seal no? Is there any other options? thanks.
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
03-27-2015, 03:53 PM | #2 |
1Addict
3233
Rep 7,893
Posts |
Ouch. Do the tires have balance issues as well, or is it just a bead seal thing?
Let us know what the problem was and how you fix it please.
__________________
|
Appreciate
0
|
03-29-2015, 11:23 AM | #3 |
Colonel
171
Rep 2,347
Posts |
No balance issue's, I'll be sanding down the inside of the rims lip to get a better bead. I will post up my results when done.
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
04-03-2015, 09:37 PM | #4 |
Colonel
171
Rep 2,347
Posts |
Fixed
The second coat of the two stage powder coat I put on had a clear textured feel to it so I sanded it down and all is well now.
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
04-04-2015, 09:03 PM | #5 |
1Addict
3233
Rep 7,893
Posts |
Thanks for the update! Glad it worked out.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|