|
|
|
10-20-2015, 06:22 AM | #1 |
Lieutenant
30
Rep 491
Posts |
Lost my boost +engine light!
OK so today i was driving around in 36 degree heat and all of a sudden i felt a big flat spot whilst accelerating and i think my JB4 reset itself (did a guage sweep and DTC was reset back to normal (full-on not partial off as per the setting). Engine light came on and car was still driving ok (no limp mode). Only issue is that i had zero boost.
Anyone able to help out with this scenario? |
10-20-2015, 08:43 PM | #3 |
Major
112
Rep 1,140
Posts
Drives: N54 135i 6MT
Join Date: Aug 2014
Location: Sydney, Australia
|
You need the JB4 usb cable asap Elee to view any codes, then log for further diagnosis
|
Appreciate
0
|
10-20-2015, 11:51 PM | #4 |
Lieutenant
30
Rep 491
Posts |
I usually run with map 2. Zero Boost, didn't even hear the wastegate rattle!
Drove it today and all is back to normal. And yes Steve i know.. i'll be seeing you in a couple of weeks too |
Appreciate
0
|
10-21-2015, 12:39 AM | #5 |
Captain
137
Rep 902
Posts |
Sounds like you jumped to map 4 - could've been overboost safety feature or something else. I've had jb4 reset on me once whilst driving and it immediately put me in map 4.
|
Appreciate
0
|
10-25-2015, 01:34 AM | #7 |
Lieutenant
30
Rep 491
Posts |
haven't driven the car since last post. Drove around today and discovered still no boost. If i half throttle to 3000rpm i get engine light and/ or flat spot and JB4 resets itself.
Even when standstill.. giving it a good rev will have the same results. ALSO. under deceleration there's a nasty rattle sound till it hits 1000rpm and then silence. I think a trip to ADVAN is coming up this week to get it checked out. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|