BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read




 

Post Reply
 
Thread Tools Search this Thread
      03-21-2013, 06:27 PM   #1
HP Autosport
Supreme Allied Commander
United_States
3776
Rep
54,162
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Performance Friction Direct Drive Rotors 2-piece Rotors

Description

The Performance Friction Direct Drive Rotor is a direct 2-piece rotor replacement for the E82 BMW 1M. They are designed to be used with the factory caliper, with no other parts or modifications necessary. Kit includes everything needed (rotor, hat and hardware) for a single rotor replacement. Priced per rotor. PFC Pads suggested - check pad-clearance before using with any other manufacturer pads.

2-piece rotors offer better cooling over a one-piece design. Performance Friction's full floating Direct Drive attachment system allows the brake disc to naturally expand/contract on both radially and axially without being constrained by the hub. This helps eliminate rotor warping, vibrations and pulsations. Due to the high quality of Performance Friction's design and manufacturing, the Direct Drive rotors are completely silent and rattle-free - a trait typically found in many competitor's 2-piece designs. The hat assembly is completely reusable - no need to buy the entire rotor again! And, because the rotor is designed for use with the factory caliper, you can still use your favorite Performance Friction brake pads!

Technical Information

- High Carbon Alloy with copper and molybdenum for high temperature strength and durability.
- Vanes turned OD and ID for balance to reduce thermal warping and vibration.
- Runout less than .001 inches, reducing Pulsation and Vibration.
- Thickness variation less than .0003 inches reduces Pulsation and Vibration.
- 47 or more vanes for superior thermal capacity.
- Aircraft quality heat treated for micro structure alignment and durability.
- Surface finish less than .7 microns.
- 100% measured and inspected to meet tolerance specifications.
- 4.2 pounds lighter than OE rotor

For more information:

http://www.1addicts.com/forums/showthread.php?t=818534
Attached Images
    

Last edited by HP Autosport; 03-21-2013 at 06:50 PM..
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:57 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST