Installing M foot rest dead pedal

Yvette · 04-20-2010, 02:51 AM

I got the foot rest with a template, showing 3 holes to drill
Do I take out the stock black plastic and drill holes?
or do I drill holes on to the stock plastic one and cover it on top?

help would be appreciated!

Edit: its 5 holes sorry.
didnt see the full template.

infinitekidM2C · 04-20-2010, 10:53 AM

I had the same issue. Basically the stock one is semi-attached to the car. You have to place the cutout on the stock foot rest and drill at each point so that it can be yanked out. Then you have to yank the stock one out. You will see carpet with holes. Then you push the M Dead pedal in.

Yvette · 04-20-2010, 02:52 PM

Quote:

Originally Posted by infinitekid2002

I had the same issue. Basically the stock one is semi-attached to the car. You have to place the cutout on the stock foot rest and drill at each point so that it can be yanked out. Then you have to yank the stock one out. You will see carpet with holes. Then you push the M Dead pedal in.

so i guess the stock one just becomes useless after drilled holes? lol

there is no going back to stock if I want to?

infinitekidM2C · 04-20-2010, 03:37 PM

no going back..be brave! HA

Yvette · 04-20-2010, 05:10 PM

Quote:

Originally Posted by infinitekid2002

no going back..be brave! HA

thanks!

BahamaBart · 04-20-2010, 08:27 PM

I just installed my foot rest pedal on top of the stocker.

Yvette · 04-23-2010, 02:46 PM

took out the stocker, there were already holes....
so I just slap the M dead pedal on it.....

install took me less than 5min lol

infinitekidM2C · 04-23-2010, 05:06 PM

pics...did u yank it out without drilling? if so my method = fail

Yvette · 04-24-2010, 10:35 PM

Quote:

Originally Posted by infinitekid2002

pics...did u yank it out without drilling? if so my method = fail

i can post it tomorrow if you want;
I used my arm force to take it(stock) out, and it seems to have holes already.
Stock ones share same holes as the M foot rest one.
No drilling required

Flavy · 03-23-2012, 01:44 PM

Quote:

Originally Posted by e90sexion

i can post it tomorrow if you want;
I used my arm force to take it(stock) out, and it seems to have holes already.
Stock ones share same holes as the M foot rest one.
No drilling required

I know its been almost over a year, but can you post the pics? I plan on doing this tomorrow.

04-20-2010, 02:51 AM	#1
Yvette Major General 761 Rep 7,408 Posts Drives: M Join Date: Sep 2006 Location: Vancouver iTrader: (19)	Installing M foot rest dead pedal I got the foot rest with a template, showing 3 holes to drill Do I take out the stock black plastic and drill holes? or do I drill holes on to the stock plastic one and cover it on top? help would be appreciated! Edit: its 5 holes sorry. didnt see the full template. Last edited by Yvette; 04-20-2010 at 02:50 PM..
	Appreciate 0 Tweet Quote

04-20-2010, 10:53 AM	#2
infinitekidM2C Major General 4207 Rep 5,728 Posts Drives: 2019 M2 Competition Join Date: Nov 2007 Location: Orange County, CA iTrader: (4) Garage List 2019 M2 COMPETITION [9.50] 2008 135i (my old car) [7.39]	I had the same issue. Basically the stock one is semi-attached to the car. You have to place the cutout on the stock foot rest and drill at each point so that it can be yanked out. Then you have to yank the stock one out. You will see carpet with holes. Then you push the M Dead pedal in.
	Appreciate 0 Quote

04-20-2010, 03:37 PM	#4
infinitekidM2C Major General 4207 Rep 5,728 Posts Drives: 2019 M2 Competition Join Date: Nov 2007 Location: Orange County, CA iTrader: (4) Garage List 2019 M2 COMPETITION [9.50] 2008 135i (my old car) [7.39]	no going back..be brave! HA
	Appreciate 0 Quote

04-20-2010, 08:27 PM	#6
BahamaBart Lieutenant 30 Rep 586 Posts Drives: 2009 135i Join Date: Aug 2009 Location: in front of you iTrader: (0)	I just installed my foot rest pedal on top of the stocker. __________________ 2009 135i Black on Black Options\|Leather\| Sport Package\| Premium Stereo\| Steering Assist \| V1 Engine MODS\| JB4 install \| AR DPs \| Berk Axleback \| ITG Filter \| BHS OCC \| Exterior Bling\| Kerscher splitter \| Interior Bling \| Bimmian pedals \| 3P Cars gauage \|
	Appreciate 0 Quote

04-23-2010, 02:46 PM	#7
Yvette Major General 761 Rep 7,408 Posts Drives: M Join Date: Sep 2006 Location: Vancouver iTrader: (19)	took out the stocker, there were already holes.... so I just slap the M dead pedal on it..... install took me less than 5min lol
	Appreciate 0 Quote

04-23-2010, 05:06 PM	#8
infinitekidM2C Major General 4207 Rep 5,728 Posts Drives: 2019 M2 Competition Join Date: Nov 2007 Location: Orange County, CA iTrader: (4) Garage List 2019 M2 COMPETITION [9.50] 2008 135i (my old car) [7.39]	pics...did u yank it out without drilling? if so my method = fail
	Appreciate 0 Quote