|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
BBS CH fitment
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
02-20-2006, 12:25 PM | #1 |
General
516
Rep 18,858
Posts |
BBS CH fitment
I am contemplating purchasing a set of 19" BBS CH staggered wheels.
Here are the specs on the wheels: 19x8.5 35mm offset fronts and 19x9.5 40mm offset rear Specs on tires currently mounted to the wheels: Front - 235/35/19 Rear - 265/35/19 A few questions, and please disregard my lack of knowledge when it comes to wheels and tires... 1 - Will I experience any rubbing on these? I have the sports suspension, but no lowering and none planned. 2 - The tires mounted are used tires. I will probably burn through them this summer, and purchase a new set come the following spring. I thought the aspect ratio for the tires are supposed to be different front and rear. Am I missing something? Any help is appreciated.... |
02-20-2006, 12:49 PM | #2 |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Bavarian, no rubbing at all, even if you lower it.
Your right, the your new tire set should be 235/35/19 f & 265/30/19 r. They will look hot!! Get 'em! Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
Appreciate
0
|
02-20-2006, 12:54 PM | #4 | |
General
516
Rep 18,858
Posts |
Quote:
Thanks for your help. I went on tirerack for tire choices, and did see that the aspect ratio should have been 5 less for the rear... For these wheels being BBS CH's, I am getting a great deal on them (assuming it goes through). Im getting excited for them |
|
Appreciate
0
|
02-20-2006, 12:57 PM | #5 |
General
516
Rep 18,858
Posts |
From the calculator on top, I am told: 9mm LESS clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 3mm
I am assuming this is in reference to stock... I would rather have them tucked in a little and have no rubbing issues than to push them out and have this as a possibility. I dont see how it extending an extra 3mm is going to be tucked in any more than my stock 162's are now... |
Appreciate
0
|
02-20-2006, 01:00 PM | #7 | |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Quote:
No curb rash? I don't think you would want to, but if you do decide on spacers(Long is starting to sound like DTDREW!), 10mm should do the trick. Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
|
Appreciate
0
|
02-20-2006, 01:04 PM | #8 |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Offsets are the distance of the centerline if the rims compared to the hub mounting surface of the rims.
With your Ch setup, you will come out 5mm more in the front and 10mm in the rear. Not much at all. You won't even come close to rubbing. Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
Appreciate
0
|
02-20-2006, 01:20 PM | #9 | |
Lieutenant General
1427
Rep 16,628
Posts |
Quote:
|
|
Appreciate
0
|
02-20-2006, 01:25 PM | #10 | |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Quote:
Long, the BBS CH rear rims are 9.5" wide with +40 offset. With that setup, the rear CH's will come out 10mm MORE than his/yours/mine stock setup. If it was a 8.5" rim with +40, then his Ch's would tuck in 3mm. So he can either run them with the govin offsets or add 10mm spacers in the back for a +30, and they will come out an extra 10mm for a total of 20mm. Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
|
Appreciate
0
|
02-20-2006, 01:53 PM | #13 | |
General
516
Rep 18,858
Posts |
Quote:
I am waiting to hear back from the seller, so Ill find out soon. This is coming off of an E46 sedan. No spacers until I have them mounted. I would like to not run spacers on my wheels... |
|
Appreciate
0
|
02-21-2006, 03:37 PM | #15 | |
General
516
Rep 18,858
Posts |
Quote:
I dont know about this. I will probably leave the BBS caps on... Deal looks like its going through... so bbs CH's soon enough |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|