|
|
|
09-20-2010, 11:57 AM | #1 |
Private
5
Rep 98
Posts |
exhaust spring bolt torque?
I recently installed an axleback and I'm having a slight rattle at very low rpm (550ish). I determined that it is coming from the exhaust hanger on the car side of the rubber. I currently have the axleback torqued to 40ft/lbs, does anyone have the correct value or can check with a torque wrench on their stock car?
|
09-21-2010, 11:32 AM | #3 |
Private
5
Rep 98
Posts |
I retorqued the exhaust hanger on the car side (8mm socket) and the rattle went away, I probably loosened it when I was trying to yank out the stock exhaust from the rubber hanger. I checked the torque on the maddad to the midpipes and it is still at 40ft/lbs so I am going to leave it as there are no more rattles.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|