HELP! Car won't go into gear

[cwalt664]

Hey guys, i need some help bad.

I drive a 2012 135i 6mt. Yesterday i take off at a stop sign, sift into first, then immediately can't shift into any gear. So i slam into neutral and coast into a parking lot.

With the car off, i can freely shift into any gear. While the car in on, and the clutch depressed, it won't go into any gear. I had the clutch replaced 7k miles ago with a south bend stage 2 endurance clutch. If i put the car into first while its off, and try and start it, the car just jumps and doesn't start.

Im thinking linkage, but to be honest i have no clue. All fluid levels are fine. I had zero issues with the car until this happened. Any help is appreciated!!

Update:

Here a video so you can see what I'm dealing with (brake light is on because i never cleared it yet, just swapped the pads)

https://www.dropbox.com/sc/z7bziyc47...LLSKOeo42O2JOa

[ianc]

Sounds like the clutch is not releasing properly. Hydraulic issue? Tow to shop that did the clutch, describe problem, have them fix...

ianc

[cwalt664]

Originally Posted by ianc

Sounds like the clutch is not releasing properly. Hydraulic issue? Tow to shop that did the clutch, describe problem, have them fix...

ianc

Thanks for the response , I'm taking it to the dealer next Thursday. Just wondering if anyone had an idea