Greyscale Vinyl on Sideskirt

FactoryFast · 01-09-2011, 07:06 PM

Saw this and it matched the emblem I did so I thought I would give it a whirl. It wasnt long enough so I pulled it off. Im going to use the other side for my new toolbox!

HondaGoneRogue · 01-09-2011, 07:22 PM

Well, considering the new 1M coupe will now have the lone M designator on the rear, the use of the same emblem on regular 135i's is waaaaaay to poser-ish. I think int was fine before but now, not so much. It's like a 128i putting the 135i badge on it. Just my .02

The badge does look good though. Not feeling the stripe placement. Like the idea\color though.

Simon_135i · 01-09-2011, 07:36 PM

I love it! Promotes individualism! =)

FactoryFast · 01-09-2011, 07:52 PM

Quote:

Originally Posted by HondaGoneRogue

Well, considering the new 1M coupe will now have the lone M designator on the rear, the use of the same emblem on regular 135i's is waaaaaay to poser-ish. I think int was fine before but now, not so much. It's like a 128i putting the 135i badge on it. Just my .02

The badge does look good though. Not feeling the stripe placement. Like the idea\color though.

Thanks for pointing this out, I didnt realize until now. Seeing how I have the N54 motor and more hp than the 1M maybe not too poser-ish...when im done i think il be short a diff and fender flares.

HondaGoneRogue · 01-09-2011, 09:46 PM

Good luck.

RimasRS · 01-10-2011, 01:33 AM

Guys will kill you for M badge

BSM 135i · 01-10-2011, 11:55 AM

Sorry man, not feelin' it especially the M badge on the back

hope you're wearing your flame suit

mineo77 · 01-10-2011, 12:15 PM

side skirt not bad, would get rid of the M on the back.

techthentic · 01-11-2011, 03:02 AM

Quote:

Originally Posted by FactoryFast

Thanks for pointing this out, I didnt realize until now. Seeing how I have the N54 motor and more hp than the 1M maybe not too poser-ish...when im done i think il be short a diff and fender flares.

Yes, because you have the defining M-characteristics of M-diff and M suspension components

sho-one · 01-12-2011, 06:26 AM

Quote:

Originally Posted by FactoryFast

Thanks for pointing this out, I didnt realize until now. Seeing how I have the N54 motor and more hp than the 1M maybe not too poser-ish...when im done i think il be short a diff and fender flares.

On the car, it might seem poser-ish, if u put the "powered by ///M" on your engine u would be mor justified.

benrappaport · 01-16-2011, 03:22 AM

fuck it if you have m3 suspension parts keep the m badge im keeping my m badge even on the 1 m comes out to the USA and i stay burning m3's so im not gonna have a problem with a 1m thinking im a poser even than i am going faster around a track then him.
2010 Space gray 135i PERFORMANCE MODS: raceland dp's, m3 control arms, koni yellows and eibach spring, JB4 (beta), Bastuck quads(all ready ordered),Burger DC intake,still debating between which LSD to get.

RimasRS · 01-16-2011, 03:59 AM

Quote:

Originally Posted by benrappaport

fuck it if you have m3 suspension parts keep the m badge im keeping my m badge even on the 1 m comes out to the USA and i stay burning m3's so im not gonna have a problem with a 1m thinking im a poser even than i am going faster around a track then him.
2010 Space gray 135i PERFORMANCE MODS: raceland dp's, m3 control arms, koni yellows and eibach spring, JB4 (beta), Bastuck quads(all ready ordered),Burger DC intake,still debating between which LSD to get.

WOW then you should get M6 badge....

Simon_135i · 01-16-2011, 10:19 AM

Quote:

Originally Posted by RimasRS

WOW then you should get M6 badge....

I would rather use M14... With a m14 in the trunk.

sixburgh · 01-16-2011, 11:47 AM

it's a good idea. honestly, i don't like the angle... it doesn't "slant" enuff.
here's a picture of my last daily driver... ps. don't tell that to this car... it's a tiger!

aacabriolet · 01-16-2011, 12:41 PM

@op love the colour combo of your car + rims!

those rims are sick! are they breyton gts-r's?

sixburgh · 01-16-2011, 01:06 PM

I thought this a better slant for yer six.

MPFit · 01-17-2011, 07:12 PM

beautiful rim/bluewater combo.. very clean
Not huge fan of the M badge, but the stripes are pretty nice imo

chrisN · 02-14-2011, 07:25 AM

+1 about the rims! gorgeous!

FactoryFast · 02-19-2011, 09:17 AM

thx for all the compliments, did the suspension KW V1s...looking just the way i want it now:

Wheels are the Bremmer Kraft BR05 from Tirerack with Dunlop SP winter sports.

18x9.5R 18x8.5F

still playing with height adjustments. Coil Overs are fun.

01-09-2011, 07:06 PM	#1
FactoryFast Second Lieutenant 28 Rep 258 Posts Drives: 2009 BMW 135i ///M Dinan S2;) Join Date: Nov 2009 Location: Southfields, New York iTrader: (0)	Greyscale Vinyl on Sideskirt Saw this and it matched the emblem I did so I thought I would give it a whirl. It wasnt long enough so I pulled it off. Im going to use the other side for my new toolbox!
	Appreciate 0 Tweet Quote

01-09-2011, 07:22 PM	#2
HondaGoneRogue They like my Swag... 433 Rep 3,762 Posts Drives: 15 GSM 435i GC Join Date: Aug 2008 Location: South Dakota iTrader: (4) Garage List 2015 435i Gran Coupe [0.00]	Well, considering the new 1M coupe will now have the lone M designator on the rear, the use of the same emblem on regular 135i's is waaaaaay to poser-ish. I think int was fine before but now, not so much. It's like a 128i putting the 135i badge on it. Just my .02 The badge does look good though. Not feeling the stripe placement. Like the idea\color though. __________________ 2015 435i Gran Coupe - Current 2008 AW 135i - Sold
	Appreciate 0 Quote

01-09-2011, 07:36 PM	#3
Simon_135i Collecting dust! 55 Rep 2,009 Posts Drives: 135i Join Date: Apr 2008 Location: San Diego iTrader: (8) Garage List 2008 E82/135i [0.00]	I love it! Promotes individualism! =)
	Appreciate 0 Quote

01-09-2011, 09:46 PM	#5
HondaGoneRogue They like my Swag... 433 Rep 3,762 Posts Drives: 15 GSM 435i GC Join Date: Aug 2008 Location: South Dakota iTrader: (4) Garage List 2015 435i Gran Coupe [0.00]	Good luck. __________________ 2015 435i Gran Coupe - Current 2008 AW 135i - Sold
	Appreciate 0 Quote

01-10-2011, 01:33 AM	#6
RimasRS Colonel 85 Rep 2,438 Posts Drives: BMW X3 SD Join Date: Sep 2010 Location: Europe iTrader: (0)	Guys will kill you for M badge
	Appreciate 0 Quote

01-10-2011, 11:55 AM	#7
BSM 135i Colonel 206 Rep 2,229 Posts Drives: 08' BSM E82 Join Date: Dec 2008 Location: Cali iTrader: (23)	Sorry man, not feelin' it especially the M badge on the back hope you're wearing your flame suit
	Appreciate 0 Quote

01-10-2011, 12:15 PM	#8
mineo77 Lieutenant Colonel 121 Rep 1,926 Posts Drives: 2010 135i,1989 PRO3,2001 530i Join Date: Aug 2009 Location: Portland,OR iTrader: (2) Garage List 2010 135i coupe [7.56]	side skirt not bad, would get rid of the M on the back. __________________ 135i coupe  6MT  TiAg  ///M sport http://www.rhominnovations.com www.musicarNW.com www.unitedBMWonline.com
	Appreciate 0 Quote

01-16-2011, 03:22 AM	#11
benrappaport Private First Class 16 Rep 166 Posts Drives: bmw 135i Join Date: Jun 2010 Location: long island iTrader: (0) Garage List 2010 135i [4.66]	fuck it if you have m3 suspension parts keep the m badge im keeping my m badge even on the 1 m comes out to the USA and i stay burning m3's so im not gonna have a problem with a 1m thinking im a poser even than i am going faster around a track then him. 2010 Space gray 135i PERFORMANCE MODS: raceland dp's, m3 control arms, koni yellows and eibach spring, JB4 (beta), Bastuck quads(all ready ordered),Burger DC intake,still debating between which LSD to get.
	Appreciate 0 Quote

01-16-2011, 11:47 AM	#14
sixburgh Lieutenant 198 Rep 428 Posts Drives: 2010 128i 6 MT BMW PE Join Date: Dec 2010 Location: Atlanta, GA iTrader: (0)	it's a good idea. honestly, i don't like the angle... it doesn't "slant" enuff. here's a picture of my last daily driver... ps. don't tell that to this car... it's a tiger! Attached Images
	Appreciate 0 Quote

01-16-2011, 12:41 PM	#15
aacabriolet Major 118 Rep 1,002 Posts Drives: '14 435i Coupe Join Date: Apr 2009 Location: SA iTrader: (0)	@op love the colour combo of your car + rims! those rims are sick! are they breyton gts-r's?
	Appreciate 0 Quote

01-16-2011, 01:06 PM	#16
sixburgh Lieutenant 198 Rep 428 Posts Drives: 2010 128i 6 MT BMW PE Join Date: Dec 2010 Location: Atlanta, GA iTrader: (0)	I pshopped your Greyscale Vinyl on Sideskirt I thought this a better slant for yer six. Attached Images
	Appreciate 0 Quote

01-17-2011, 07:12 PM	#17
MPFit Second Lieutenant 4 Rep 251 Posts Drives: 2012 BMW 135i CSM Join Date: Jun 2010 Location: Gulf Coast, FL iTrader: (1)	beautiful rim/bluewater combo.. very clean Not huge fan of the M badge, but the stripes are pretty nice imo
	Appreciate 0 Quote

02-14-2011, 07:25 AM	#18
chrisN Lieutenant 30 Rep 585 Posts Drives: bmw 125i coupe Join Date: Dec 2010 Location: sydney iTrader: (0) Garage List 2010 125i [8.66]	+1 about the rims! gorgeous!
	Appreciate 0 Quote

02-19-2011, 09:17 AM	#19
FactoryFast Second Lieutenant 28 Rep 258 Posts Drives: 2009 BMW 135i ///M Dinan S2;) Join Date: Nov 2009 Location: Southfields, New York iTrader: (0)	thx for all the compliments, did the suspension KW V1s...looking just the way i want it now: Wheels are the Bremmer Kraft BR05 from Tirerack with Dunlop SP winter sports. 18x9.5R 18x8.5F still playing with height adjustments. Coil Overs are fun.
	Appreciate 0 Quote