|
|
|
11-05-2013, 10:53 AM | #1 |
Major
79
Rep 1,051
Posts |
FS: DIY Dual cone intake, K&N filters
Picked up a used AFE intake cheap so I can sell my DIY dual cone intake now. Includes two of this exact filter: http://www.amazon.com/gp/product/B00062YPOY Total of about 15k-18k miles on them. Just cleaned and reoiled about 1500 miles ago so they should be good for a while. I recommend cleaning and reoiling every 10k miles, or about as often as you should be replacing a non-reusable filter like the factory piece. Long term you'll save money if you don't mind cleaning and reoiling periodically. It's just the filters and two 4 inch or so pieces of 2.5" aluminum pipe I cut from a longer section. You just take the stock intake out, put these in, tight the two clamps and you're done. $50 shipped UPS or USPS to 48 states, or add $5 for Fedex. Please PM for quote outside the US or AK or HI. Will have pictures up shortly.
__________________
2009 BMW 135i 6MT Sport, AFE intake, Cobb AP, Apex 18x8.5+9.5, 255/275 PSS
|
11-05-2013, 10:54 AM | #2 |
Major
79
Rep 1,051
Posts |
Does NOT include, but I recommend buying these:
http://www.amazon.com/gp/product/B00029WYDU http://www.amazon.com/gp/product/B00029WYBM One set of the cleaner, oil, and the filters themselves will last you probably the life of the car. I've had the same cleaner and oil can for years from when I put a K&N on my last car. Both still about half full after many cleanings.
__________________
2009 BMW 135i 6MT Sport, AFE intake, Cobb AP, Apex 18x8.5+9.5, 255/275 PSS
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|