Sponsored by The Tire Rack

[kb135]

Has anyone fitted or have any advice on fitting GT-C3 (same as VMR v713) wheels in the following sizes to a 135i

19x8.5 ET+35
19x9.5 ET+45

With 225/35/19 and 245/30/19 tires?

The wheels can be found here:
http://item.mobileweb.ebay.com.au/vi...915&cmd=VIDESC

Any advice? I am finding it extremely difficult to be the V713 in 1er offsets- nobody not even VMR themselves seem to have stock of the 19x9.5 et45 for me.

Regards

[EuroTunerz5]

I have vmr v713 hyper silver for sale in 1 series fitment... With brand new tires and BMW TPMS. PM me of interested I am selling them cheap I got SF-71s!

[IZAGLO]

I have the 713's in Gunmetal....My advice to you is to get the 45 offset for the front...and if possible put on a tire in the rear that fits..Some 245's on a 9.5" rim look like ass they are toooo stretched. I have 255/30/19 on the 9.5" rear in Yokohama ADO8's and they work but need a fender role and slight negative camber in the rear to work but WORTH all the hard work with it's tenacious grip in the summer and they do not look stretched as the the ADO8 run wide...but they are right on the edge of fitting properly...anything smaller well...looks are subjectable but the stretched look on a BMW looks off IMO and would not buy these rims with that look...I would only buy these rims in Gunmetal or Black....or paint or powdercoat them.

[kb135]

Thanks for the advice Izaglo. Will try to squeeze in a 255 with a fender roll. I have also been leaning more towards a gunmetal finish lately. I know it's overused but I have also been thinking of the vmr v710 as a possible alternative.

[VMRWheels]

Thanks for creating this thread! Funny that v713's are one of my favorite wheels on the 1-series but rarely anyone gets them. We generally recommend going with a 19x8.5 +45, 19x9.5 +45. A bit on the aggressive side with the rear +45 so I recommend running a 245/30 if you want a no rub fitment. If you're willing to do a slight fender roll, a 255 will work fine. Square setups are definitely possible too with a 19x8.5 +45 all around.









Feel free to PM me if you have questions.

[E91_E88_E21]

to VMR: i like the look of this set up, better in grey or black but very good

[VMRWheels]

Originally Posted by E_90

to VMR: i like the look of this set up, better in grey or black but very good

I like it a lot too! My 2nd choice behind the v701's on the 1-series. We only make Hyper Silver in the 5x120 bolt pattern but we have powder coating options available.

[E91_E88_E21]

Originally Posted by VMRWheels

I like it a lot too! My 2nd choice behind the v701's on the 1-series. We only make Hyper Silver in the 5x120 bolt pattern but we have powder coating options available.

sadly only on 19", sadly horrible expensive from EU dealer in swiss.
what do they think they are?

i must say i like the options on VWR wheels a lot. but had a really bad experience back in march 2009. we never came to a final solution, may be we come together again one day.

back to topic V713 looks good