Set of Kosei K8R. 17x9. +45

[cboone10]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Brand new. 450$. Knoxville TN.

[JB135MDCT]

Do these fit e82 135i ?

[cboone10]

Originally Posted by JB135MDCT

Do these fit e82 135i ?

Yes, the 9s are more specifically for the rears. The run the 9s up front, you need spacers, coilovers. You can buy 8s for front and they fit fine. I will sell two 9s for 200 plus shipping.

[gtjosh]

Are these still available?

[shawnj]

Hmm, running eibach springs with msport shocks. wonder if they would fit.

[shawnj]

Interested, any idea?

[bNks334]

I run k8r in 17x9 square. You need 7mm spacers and -2* camber. Running 255/40/17 square. You'll need to roll the fenders a bit too. It's a nice agressive setup.

[deesea]

Originally Posted by bNks334

I run k8r in 17x9 square. You need 7mm spacers and -2* camber. Running 255/40/17 square. You'll need to roll the fenders a bit too. It's a nice agressive setup.

That's my dream set-up (but 18x9 et45)...May I ask what brand of tires you're running and are the front and rear rolled? -2 camber all around?

Thanks

[bbnks2]

Originally Posted by deesea

That's my dream set-up (but 18x9 et45)...May I ask what brand of tires you're running and are the front and rear rolled? -2 camber all around?

Thanks

RS3 255/40/17

-1.7R camber and fenders are rolled slightly (I did it myself with a chisel and hammer carefully of course).

-2.2F and rolled fenders same way as rear.

More cambers helps of course, but reduces straight line traction so I keep rear camber as low as possible. Rear starts to rub at less than -1.7* and could use a better roll.

[deesea]

Originally Posted by bbnks2

RS3 255/40/17

-1.7R camber and fenders are rolled slightly (I did it myself with a chisel and hammer carefully of course).

-2.2F and rolled fenders same way as rear.

More cambers helps of course, but reduces straight line traction so I keep rear camber as low as possible. Rear starts to rub at less than -1.7* and could use a better roll.

Thanks for the info. About to try a fit tonight!

[bNks334]

Originally Posted by deesea

Thanks for the info. About to try a fit tonight!

I'd put 8mm spacers up front. 7mm rubbed the strut a bit. Make sure you get extended lugs (or swap to wheel studs). 8mm is too much spacing for stock lugs.