|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
01-14-2014, 01:26 PM | #1 |
Lieutenant
243
Rep 578
Posts |
Macht Schnell Harness Receptacles- fits all MS Floor Mounts
Removed a Recaro seat from my e92 (but everything fits in e82 as well) and have all of the mounting hardware for sale, seat is not available. Everything is in very good condition, purchased new and used it for less than one year. The MS floor mounts have some scratches but when mounted you can't even see them, none of the mounting holes are stripped or damaged. Macht Schnell Hybrid Seat belt/Harness Receptacle - $sold Macht Schnell Competition Liteweight Floor Mounts (fits e90, e92, e93, M3, e82, 1M)- $SOLD Recaro Universal Steel Side Mounts (Black) - $SOLD Recaro Universal Seat Sliders - $SOLD Schroth 4-point ASM Harness (Black with Black Logo) with pull handles and black shoulder pads (with black/white logo) - $SOLD I also included some pictures of them mounted in my car, if you have any questions regarding mounting a race seat please let me know. I ran both Schroth ASM 4-point harnesses and the OEM 3-point seat belt at the same time with this set-up, had no problems. Installing race seats is generally a bit difficult however I've sourced all the correct hardware for this set, bolted it together, and have confirmed fitment so it's ready to go, all you need is a side-mount bucket seat! (I used a Recaro Pole Position but Sparco, Status, Bride, etc should also work) Thanks! Last edited by daveishi; 07-19-2021 at 12:05 PM.. Reason: sold |
01-14-2014, 10:47 PM | #3 |
Lieutenant General
2282
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.22] |
This is a SMOKING deal. This has got to be nearly half off, someone jump on this.
And OP is absolutely correct on not bending those tabs, they were only meant to be bent once and bending it any further will weaken the metal. Note the tabs he is referring to is for the harnesses, not the seat hardware. |
Appreciate
0
|
01-15-2014, 12:06 PM | #4 | |
Lieutenant
243
Rep 578
Posts |
Quote:
I guess I should note that everything is universal except the floor mounts which are specific to e9x/e82. |
|
Appreciate
0
|
01-16-2014, 09:47 PM | #6 |
Lieutenant General
2282
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.22] |
I have 2 Pole Positions in my Z4 with 6 point harnesses. I ended up using MS hardware as well.
|
Appreciate
0
|
01-21-2014, 06:23 PM | #8 |
Lieutenant
243
Rep 578
Posts |
hey guys, sorry i haven't gotten back to all of you, been busy organizing a track event (buttonwillow on 2/1 if anyone's interested).
Update: I was able to fit the Pole Position into my new car so I'm really looking to sell just the mounting hardware, price is $420 picked up, and the harness which I'm asking $180 for (with handles and shoulder pads). Thanks! |
Appreciate
0
|
01-28-2014, 07:40 PM | #9 |
Brigadier General
459
Rep 4,531
Posts |
I know this is going to be a huge derail, but how did the Pole Positions fit in your E92 compared to the stock seats?
Was it lower than stock? GLWS, I which I was in the market now. |
Appreciate
0
|
01-29-2014, 12:42 PM | #10 | |
Lieutenant
243
Rep 578
Posts |
Quote:
Thanks! |
|
Appreciate
0
|
07-14-2014, 01:08 AM | #16 |
Lieutenant
243
Rep 578
Posts |
after a couple sale fall throughs the floor mounts, harness, and seat belt/harness receptacles are still available. Strongly prefer local pickup unless you pay shipping or are within CONUS
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|