<<<(((EWS introduces Alufelgen!!!!!!!)))>>>

Brian@EWS · 09-25-2010, 06:39 AM

Yes you have read the title correct! As part of our promise to never stop seeking for high quality products. EWS is proud to announce that we are Alufelgen Authorized and EXCLUSIVE distributor in Australia

We have been offering a range of wheel products to BMW enthusiasts Australia wide including Linea Corse, Alloy Technic and Modulare Forged. Our products are specified for BMW only

. However, we do believe you are still lack of choices. That's why, EWS has decided to carry the purest, cleanest BMW wheel design of all time, the CSL wheels. So here we go, EWS = Alufelgen.

It is an HONOR for us to carry Alufelgen as part of our product lines. The reasons we said so, the reasons why we choose to deliver Alufelgen instead of the sea of other CSL brands you see out there and the reasons why Alufelgen has been a major hit on the forums are because of the following FACTS:

- Alufelgen uses low pressured cast as opposed to the low cost gravity cast method used by other manufacturers.

- Despite higher cost of production, Alufelgen pricing is highly competitive to other well known CSL reps brands (Miro, VMR, Avant Grade)

- Alufelgen wheels are STRONGER and LIGHTER than ANY other CSL cast reps available in the market (rear wheel weights only .7lbs more than the OEM CSL (25.5lbs vs 26.2lbs) which is lighter than the VMR)

- Concavity optimized to ET30 which makes the concavity of Alufelgen CSL reps deeper than other brands.

- Alufelgen wheels front profile and rear concavity reflect a nearly identical face as the OEM CSL.

- Alufelgen wheels spoke profile is thicker and resembles more the OEM CSL.

- Alufelgen wheels are powdercoated which is a more durable finish.

- Alufelgen has available fitment most popular BMW models.

- The folks at Alufelgen are COOL!

(FACT!

)

- And the list goes on and on.

__________________________________________________ _________
__________________________________________________ _________

EWS would also wish to use this opportunity to express out most sincere thanks to 1addicts and the whole bimmerpost board members supports!!!

We truly hope that we will be able to be your most reliable source for your modding journey and you would support Alufelgen as you have been supporting iCarbon and our other products.

Special thanks to Andrew@SouthernBM for your great help!

We would also like to apologise if there have been any inconvenience to any one during our start up stage. We are also sorry if your account balance is dropping or you got into some "serious discussions" with the missus regarding the modding budget, please blame it all on Brian

.

Thank you very much,

European Wheel Source.

__________________________________________________ __________
__________________________________________________ __________

Brian@EWS · 09-25-2010, 06:39 AM

Alufelgen SF-71

Brian@EWS · 09-25-2010, 06:56 AM

On e82s:

BBK · 09-25-2010, 06:57 AM

Question is, do you sell your items cheaper than what we can import them for ourselves?

Brian@EWS · 09-25-2010, 06:58 AM

Quote:

Originally Posted by BBK

Question is, do you sell your items cheaper than what we can import them for ourselves?

YES! guaranteed!

Brian@EWS · 09-25-2010, 07:04 AM

Please look forward to our gb pricing, for now all i can say is generally you will be looking at less than $1500 for a set of 19", both CS7 and SF-71. The more participants the further price will drop from the indicative $1500 AND we will do wheels/tyres package if anyone interested.

Cheers,

Brian@EWS

banglemangle · 09-25-2010, 07:14 AM

Quote:

Originally Posted by Brian@EWS

[COLOR="Blue"]
...
[COLOR="Blue"]It is an HONOR for us ...

(sp) HONOUR

Brian@EWS · 09-25-2010, 07:20 AM

Quote:

Originally Posted by banglemangle

(sp) HONOUR

Right, i totally forgot

cozza · 09-25-2010, 07:28 AM

I'm in. 2 of my existing CSLs have been wrecked by gutter rash thanks to being run off the road by an idiot taxi driver. How soon until they're available?

Brian@EWS · 09-25-2010, 07:41 AM

Quote:

Originally Posted by cozza

I'm in. 2 of my existing CSLs have been wrecked by gutter rash thanks to being run off the road by an idiot taxi driver. How soon until they're available?

Depends on what are you looking for? SF71 or CS7. I will check availability over the weekend and let you guys know. All i know so far is 335i fitment is sold out, awaiting production for mid Oct.

stylish. · 09-25-2010, 08:16 AM

Are these offset friendly for our beloved 1ers?

mra · 09-25-2010, 08:34 AM

Are the wheels on the white 1'er gun metal grey? Certainly don't look as silver as what's on the red car.

Also I'm in, just need to work out what colour.

Brian@EWS · 09-25-2010, 08:49 AM

Quote:

Originally Posted by mra

Are the wheels on the white 1'er gun metal grey? Certainly don't look as silver as what's on the red car.

Also I'm in, just need to work out what colour.

Glad to hear!

Yeah those on the AW looks pretty gunmetal to me. For colors, we have Silver, Gunmetal, Matte Black and Hyper Black, so take your time to figure out what you like best

Brian@EWS · 09-25-2010, 08:54 AM

Quote:

Originally Posted by stylish.

Are these offset friendly for our beloved 1ers?

Positive

. These are made to fit e8x straight on, no guard rollings, no spacers or centering rings required, that's the beauty of Alufelgen

In the photos above are SF-71 18x8.0f ET +48 9.0r ET +48

Alufelgen has came up with the new 19" SF-71 for 1 series in 19x8.5ET+45 and 19x9.5ET +50, you can check them out here

http://www.1addicts.com/forums/showthread.php?t=397845

Cheers,

Brian@EWS

Brian@EWS · 09-25-2010, 08:56 AM

Guys i think to keep track of people interested, we'll just make a pre order list and just add your name on if you'r keen, i will make sure to keep people on the list updated, to start with we got

1. Cozza
2. Mra

Brian@EWS · 09-25-2010, 09:16 AM

Some photos of 19" SF-71 on iCarbon's e82

[/CENTER]

Orlin · 09-25-2010, 06:14 PM

The 19" SF-71 wont be ready until closer to December, is that correct?

Brian@EWS · 09-25-2010, 08:10 PM

Quote:

Originally Posted by Orlin

The 19" SF-71 wont be ready until closer to December, is that correct?

Think so, I will confirm over the weekend

AussieAlf · 09-25-2010, 08:16 PM

Quote:

Originally Posted by Brian@EWS

Some photos of 19" SF-71 on iCarbon's e82

Sorry a bit hard to see the wheels in those photos.

Cheers,
Alf

Brian@EWS · 09-25-2010, 09:15 PM

Quote:

Originally Posted by AussieAlf

Sorry a bit hard to see the wheels in those photos.

Cheers,
Alf

Look for the smoking gunmetal rounded things under the car, not the smoking ginger in front of it, fitment and sizing of that one is unavailable

Cheers,

Brian

cozza · 09-25-2010, 09:19 PM

Quote:

Originally Posted by Brian@EWS

Depends on what are you looking for? SF71 or CS7. I will check availability over the weekend and let you guys know. All i know so far is 335i fitment is sold out, awaiting production for mid Oct.

Definitely the SF 71 in gunmetal. Do we know pricing as yet?

Brian@EWS · 09-25-2010, 09:44 PM

Quote:

Originally Posted by cozza

Definitely the SF 71 in gunmetal. Do we know pricing as yet?

I will list pricing up properly but for 19" SF-71 and CS7 we are looking at

RRP: $1800 + domestic shipping

GB<5 : $1460 + domestic shipping (SAVE $340)

GB>5 : $1410 + domestic shipping (SAVE $390)

09-25-2010, 06:39 AM	#1
Brian@EWS Second Lieutenant 17 Rep 294 Posts Drives: deciding... Join Date: Jul 2010 Location: Australia iTrader: (0)	<<<(((EWS introduces Alufelgen!!!!!!!)))>>> Yes you have read the title correct! As part of our promise to never stop seeking for high quality products. EWS is proud to announce that we are Alufelgen Authorized and EXCLUSIVE distributor in Australia We have been offering a range of wheel products to BMW enthusiasts Australia wide including Linea Corse, Alloy Technic and Modulare Forged. Our products are specified for BMW only . However, we do believe you are still lack of choices. That's why, EWS has decided to carry the purest, cleanest BMW wheel design of all time, the CSL wheels. So here we go, EWS = Alufelgen. It is an HONOR for us to carry Alufelgen as part of our product lines. The reasons we said so, the reasons why we choose to deliver Alufelgen instead of the sea of other CSL brands you see out there and the reasons why Alufelgen has been a major hit on the forums are because of the following FACTS: - Alufelgen uses low pressured cast as opposed to the low cost gravity cast method used by other manufacturers. - Despite higher cost of production, Alufelgen pricing is highly competitive to other well known CSL reps brands (Miro, VMR, Avant Grade) - Alufelgen wheels are STRONGER and LIGHTER than ANY other CSL cast reps available in the market (rear wheel weights only .7lbs more than the OEM CSL (25.5lbs vs 26.2lbs) which is lighter than the VMR) - Concavity optimized to ET30 which makes the concavity of Alufelgen CSL reps deeper than other brands. - Alufelgen wheels front profile and rear concavity reflect a nearly identical face as the OEM CSL. - Alufelgen wheels spoke profile is thicker and resembles more the OEM CSL. - Alufelgen wheels are powdercoated which is a more durable finish. - Alufelgen has available fitment most popular BMW models. - The folks at Alufelgen are COOL! (FACT! ) - And the list goes on and on. __________________________________________________ _________ __________________________________________________ _________ EWS would also wish to use this opportunity to express out most sincere thanks to 1addicts and the whole bimmerpost board members supports!!! We truly hope that we will be able to be your most reliable source for your modding journey and you would support Alufelgen as you have been supporting iCarbon and our other products. Special thanks to Andrew@SouthernBM for your great help! We would also like to apologise if there have been any inconvenience to any one during our start up stage. We are also sorry if your account balance is dropping or you got into some "serious discussions" with the missus regarding the modding budget, please blame it all on Brian . Thank you very much, European Wheel Source. __________________________________________________ __________ __________________________________________________ __________
	Appreciate 0 Tweet Quote

09-25-2010, 06:39 AM	#2
Brian@EWS Second Lieutenant 17 Rep 294 Posts Drives: deciding... Join Date: Jul 2010 Location: Australia iTrader: (0)	Alufelgen SF-71 Last edited by Brian@EWS; 09-25-2010 at 06:55 AM..
	Appreciate 0 Quote

09-25-2010, 06:56 AM	#3
Brian@EWS Second Lieutenant 17 Rep 294 Posts Drives: deciding... Join Date: Jul 2010 Location: Australia iTrader: (0)	On e82s: Last edited by Brian@EWS; 09-25-2010 at 07:09 AM..
	Appreciate 0 Quote

09-25-2010, 06:57 AM	#4
BBK Banned 88 Rep 3,070 Posts Drives: A boring one... Join Date: Oct 2008 Location: Australia iTrader: (0) Garage List 2009 BMW 135i [5.76]	Question is, do you sell your items cheaper than what we can import them for ourselves?
	Appreciate 0 Quote

09-25-2010, 07:04 AM	#6
Brian@EWS Second Lieutenant 17 Rep 294 Posts Drives: deciding... Join Date: Jul 2010 Location: Australia iTrader: (0)	Please look forward to our gb pricing, for now all i can say is generally you will be looking at less than $1500 for a set of 19", both CS7 and SF-71. The more participants the further price will drop from the indicative $1500 AND we will do wheels/tyres package if anyone interested. Cheers, Brian@EWS
	Appreciate 0 Quote

09-25-2010, 07:28 AM	#9
cozza ///Mthusiast 135 Rep 1,751 Posts Drives: M135i (March delivery) Join Date: Jul 2007 Location: Melbourne, Australia iTrader: (0)	I'm in. 2 of my existing CSLs have been wrecked by gutter rash thanks to being run off the road by an idiot taxi driver. How soon until they're available? __________________ ///M135i: AUTO \| ALPINE WHITE \| CORAL RED LEATHER \| HEATED SEATS \| SUNROOF \| NAV \| DAB TUNER \| HARMAN KARDON \| PERFORMANCE BITS 'N' PIECES
	Appreciate 0 Quote

09-25-2010, 08:16 AM	#11
stylish. Easily bored... 9 Rep 198 Posts Drives: 135i N55 Join Date: Aug 2008 Location: Melbourne, Australia iTrader: (0)	Are these offset friendly for our beloved 1ers?
	Appreciate 0 Quote

09-25-2010, 08:34 AM	#12
mra Private 0 Rep 85 Posts Drives: 135i Join Date: Jan 2010 Location: Australia iTrader: (0)	Are the wheels on the white 1'er gun metal grey? Certainly don't look as silver as what's on the red car. Also I'm in, just need to work out what colour.
	Appreciate 0 Quote

09-25-2010, 08:56 AM	#15
Brian@EWS Second Lieutenant 17 Rep 294 Posts Drives: deciding... Join Date: Jul 2010 Location: Australia iTrader: (0)	Guys i think to keep track of people interested, we'll just make a pre order list and just add your name on if you'r keen, i will make sure to keep people on the list updated, to start with we got 1. Cozza 2. Mra
	Appreciate 0 Quote

09-25-2010, 09:16 AM	#16
Brian@EWS Second Lieutenant 17 Rep 294 Posts Drives: deciding... Join Date: Jul 2010 Location: Australia iTrader: (0)	Some photos of 19" SF-71 on iCarbon's e82 [/CENTER]
	Appreciate 0 Quote

09-25-2010, 06:14 PM	#17
Orlin Major 44 Rep 1,359 Posts Drives: F30 335i Join Date: Feb 2009 Location: Brisbane, Australia iTrader: (1)	The 19" SF-71 wont be ready until closer to December, is that correct?
	Appreciate 0 Quote