03-04-2023, 01:47 AM | #1 |
Registered
0
Rep 3
Posts |
Window Issue
Hello all,
Apologise if this has been addressed multiple times but I’m having no luck! My windows will not reset! No matter what method I have tried. The windows will roll down automatically when using the switch, but not up. The window no longer drops when opening the door. This issue came about after coding some parts of the car. We have refreshed the original settings to the car using the back up but nothing. Can anyone advise or even explain how this can be sorted? Even using INPA or NCS? Thanks in advance! |
03-06-2023, 09:53 AM | #2 |
Lieutenant
300
Rep 429
Posts |
You have to reset the window limits using the up-down switch, not coding.
Roll window all the way down Hold the button down for 15 seconds This switches to learning mode, if it will auto-up you didn't hold it down for the right amount of time to switch into learning mode. Once you've got it to where it won't auto-up, roll the window all the way to the top, release the up switch. Pull up on the switch one more time to set the end location. Now try the auto-up/down functionality. |
Appreciate
2
TylerTheTy0.00 ayao643.00 |
03-06-2023, 09:50 PM | #3 | |
Registered
0
Rep 3
Posts |
Quote:
Yes, I have tried this and the other methods out there but nothing seems to be working at all. No matter what I try the windows continue to act as nothings changed. |
|
Appreciate
0
|
03-07-2023, 03:37 PM | #4 |
Lieutenant
300
Rep 429
Posts |
If you know you restored the coding you changed, by reading from the modules again to check, then I would check the window switch isn't bad, or the module/junction box.
|
Appreciate
1
TylerTheTy0.00 |
03-07-2023, 03:57 PM | #5 |
Registered
0
Rep 3
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|