|
|
|
06-11-2014, 06:11 PM | #24 |
Enlisted Member
9
Rep 49
Posts |
Sorry to resurrect an old thread, but I'm interested in doing this myself... Lots of questions tho. What head-units have you found that will fit? How did you relocate the stock head-unit?
I'm torn between doing this double-din versus going single-din in my '10 128. Any advice would be great!!
__________________
My 1st BMW:
2010 128i / Completed mods: exhaust flapper disable/ Audio overhaul - Kenwood Excelon/ JLAudio XD600-6/ all new speakers/ More to come! |
Appreciate
0
|
06-13-2014, 09:43 AM | #25 |
Captain
32
Rep 919
Posts |
sarge doesn't visit the site much anymore, but the stock unit for the build was relocated to the trunk next to the xm radio module. the fiber optic lines had to be extended from the dash to the rear as well as the canbus lines.
it's no joke to retrofit if you want to keep the sos/bmw assist with no error codes. if you dont care about those options, just unplug the existing radio and put in whatever you want. the dash interior has a lot of plastic support structure which youll have to remove with a dremel to fit an aftermarket unit. |
Appreciate
0
|
06-16-2014, 09:47 PM | #26 |
Enlisted Member
9
Rep 49
Posts |
I figured as much. I was hoping to glean a little more information. Trying to decide whether it's worth the effort to do the double-din vs. doing the single. I'm slowing gathering parts...
|
Appreciate
0
|
08-03-2015, 10:08 PM | #28 |
Major
180
Rep 1,310
Posts |
will this work with MHD flasher does it support it?
__________________
MHD Custom Flash (E85) [Jake@MOTIV] / Vargas Stage 2 Turbos / Fuel it LPFP Stage 3+/ Moitiv Port Injection/ MMP Turbo Inlets/ 3.5 Tmap Sensor / ER FMIC /ER Chargepipe HKS-BOV / AA Downpipes / Agency Power Race mid pipes / Berk Technology race exhaust / BMW SSK / BC Forged Whees Toyo R888 tires / KW Club sport coilovers+KW Camber Plates / Spec stg2+Spec SMSFW/ APR Wing GTC200
|
Appreciate
0
|
08-27-2015, 10:10 AM | #29 |
Enlisted Member
0
Rep 41
Posts
Drives: e88 6mt 135i vert, injen dci
Join Date: Aug 2014
Location: florida
|
I have a question about the wiring harness with the steering control module,,,there is a ping with two blue wires coming out of one pin.. what are that for and also, there are two connectors one brown one black, where do they go?? I tried to contact janus to not avail.. maybe you could be some assistance ... I had ordered the bezel mount, canbus gong boxy and steering wheel control module.. it was the a-3 discount harness.. could you please help me? im waiting on the right mount they sent me a e90 accidently so im trying to figure the wiring out before hand, the instruction they sent doesn't cover the question at hand... I lok forward to hearing your response.. thank you
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|