|
|
|
06-30-2014, 08:42 PM | #1 |
Private First Class
32
Rep 181
Posts |
race seat brackets
I have some recaro SPG XLs coming and the vendor doesn't sell the car specific brackets. I found a used set on ebay that came out of an E92 M3 and I see Turner Motorsports sells brackets that apparently work for both E8x and E9x platforms.
Is It safe to assume that ANY bracket for a e9x would fit a 135i? Please help. need to place and order ASAP. for track weekend
__________________
Fuel-it.biz|Cobb|Pure Turbos|ActiveAutowerk
Berk|BMS|Evolution Racewerks|M GmbH VMR|StopTech|EBC|Michelin|Nitto Royal Purple|Motul|Mann Filters|LUX |
06-30-2014, 08:49 PM | #2 |
Banned
1518
Rep 4,744
Posts
Drives: S65 1M Clone & E92 M3 4.6L
Join Date: Apr 2011
Location: San Francisco
|
I have VAC floor mounts for the e82 and they are shorter than the e9x ones. The E9X ones may fit but these are definitely shorter.
|
Appreciate
0
|
07-01-2014, 07:48 AM | #4 |
Private First Class
32
Rep 181
Posts |
So I think i'm set up. I measured my 2007 335 and then my 135i and the measurements between fasteners on the floor mounts are the same. So I should be good with the E9x floor mounts which are on the way, plus the Recaro sliders
__________________
Fuel-it.biz|Cobb|Pure Turbos|ActiveAutowerk
Berk|BMS|Evolution Racewerks|M GmbH VMR|StopTech|EBC|Michelin|Nitto Royal Purple|Motul|Mann Filters|LUX |
Appreciate
0
|
07-01-2014, 08:27 AM | #5 |
Lieutenant General
2280
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.20] |
E8/9x floor mounts are the same.
|
Appreciate
0
|
07-03-2014, 07:14 AM | #6 |
Private First Class
32
Rep 181
Posts |
Thanks all! Seats should be in on the 8th. I'll post pics. If anyone is reading this to gain information one thing to remember is that if you plan on running your factory seat belt, the latch part is fastened to the factory seat. Turner Motorsports makes an adapter to move it to the floor. I will fab my own @ work.
__________________
Fuel-it.biz|Cobb|Pure Turbos|ActiveAutowerk
Berk|BMS|Evolution Racewerks|M GmbH VMR|StopTech|EBC|Michelin|Nitto Royal Purple|Motul|Mann Filters|LUX |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|