JLC Custom Conversion Kits for Stock Halogen Cars

[Sam@JLC]

Looking to turn this:



Into this?



Then we have the conversion kit for you!

What is it?
Only the best solution out there for 128i owners who didn't order theirs with the OEM Xenons, and don't want to spend tons of money to buy the headlights, have them coded for the car, etc...
A complete, error-less, and bright conversion that is completely plug and play*

What it includes
Depo Projector headlights
Upgraded LED Angel Eyes
Error Free HIDs (No flickering, and no bulb out warnings)

Color Choices for LEDs and HIDs
White
Plasma White (Pictured)



And what everyone wants to know: Pricing
Complete Kit: $900 shipped for lower 48 US states
$850 Local Pickup

Also Available for purchase individually upon Inquiry:
Error Free HIDs
Error Free HIDs (Fog Lights)
LED Angel Eye Upgrade

So what if you already have depo projectors?
No worries, we will still do the conversion for you, just send us your headlights and we will take care of the rest.

Here are some common asked for pictures:

Up Close of Angel Eyes:


Turned Off During the Day: (Note: Blue is from high beam bulb)


In Direct Sunlight:


In the Rain: (LOL)



*if you want to run the Angel eyes as DRLs, inquire for details

[Satalite]

How much extra for DRLs? And lastly can you guys do this to E90 DEPO lights? My brother is looking to get some as well.

[Sam@JLC]

Originally Posted by Satalite

How much extra for DRLs? And lastly can you guys do this to E90 DEPO lights? My brother is looking to get some as well.

Hope that clears it up. You will have a pm shortly. And if we should be able to do those as well. Let me get back to you on that one though.

[Knob]

-----
So what if you already have depo projectors?
No worries, we will still do the conversion for you, just send us your headlights and we will take care of the rest.
-----

How much do want for this?

And how much for depos with angel eyes only (without HID) ?

[derekL]

you have pictures of the just the white color?

[AW128i]

Sam, couple things. You mention we have a color choice for LEDs and HIDs? Can you detail what was worked out to run the AEs as DRLs and, in your opinion, are these LED AEs bright enough to run as DRLs or will they just look kind of washed out during the day? Also, how do we order

[onefastman]

Its about time!!!

You guys are going to sell a ton!

[Sam@JLC]

Originally Posted by Knob

-----
So what if you already have depo projectors?
No worries, we will still do the conversion for you, just send us your headlights and we will take care of the rest.
-----

How much do want for this?

And how much for depos with angel eyes only (without HID) ?

You will have a pm soon.

[Sam@JLC]

Originally Posted by derekL

you have pictures of the just the white color?

Not yet, but I will try to get one of the actual ring, or once the first local buyer gets them. I have seen them, and they are a really bright white.

[Sam@JLC]

Originally Posted by AW128i

Sam, couple things. You mention we have a color choice for LEDs and HIDs? Can you detail what was worked out to run the AEs as DRLs and, in your opinion, are these LED AEs bright enough to run as DRLs or will they just look kind of washed out during the day? Also, how do we order

Yes, the LEDs are white or the plasma white (white with a bit of blue to it)
The HIDs are either 6k or 8k
We are still waiting on someone to test out the parking light. If you could do that, that would be great
Ordering is through paypal, unfortunately pm is not available for me at the moment, but I will setup a temporary email for this and post it here.

[Satalite]

I am assuming that we need to wait on the parking light test? Is that a quick test? I go home today and may be able to try it out. Just need a few steps on how to get to unplug it. (never taken headlight out)

[Sam@JLC]

Originally Posted by Satalite

I am assuming that we need to wait on the parking light test? Is that a quick test? I go home today and may be able to try it out. Just need a few steps on how to get to unplug it. (never taken headlight out)

Yep all that needs to be done is to unplug or pull out the small city light and see if you receive a bulb out warning on the dash. No need to actually take out the headlight. Just pop off the cap behind the headlight and then unplug the bulb or its connector

[Satalite]

Taking out the small diagonal parking light by the low beam light causes a bulb error on the dash. Pain to put back the cap on the light...

[AW128i]

Originally Posted by Sam@JLC

Yes, the LEDs are white or the plasma white (white with a bit of blue to it)
The HIDs are either 6k or 8k
We are still waiting on someone to test out the parking light. If you could do that, that would be great
Ordering is through paypal, unfortunately pm is not available for me at the moment, but I will setup a temporary email for this and post it here.

And if we prefer a HID kit with a lower Kelvin rating, say 4500k-5000k, is that still an option? I've seen 6000k HIDs in-person and I have to say, they're more blue than white, which actually has less lumens than factory HIDs.

Originally Posted by Satalite

Taking out the small diagonal parking light by the low beam light causes a bulb error on the dash. Pain to put back the cap on the light...

Did you remove the small bulb that's located in the high beam reflector?

[Yvette]

just ouf of curiosity,
are you guys able to make conversion kit for OEM xenon headlight for halogen headlight?
like for plug and play kit.

[Satalite]

Originally Posted by AW128i

Did you remove the small bulb that's located in the high beam reflector?

The small bulb tilted inward from the side of the reflective housing? Yes I did. It produced an in dash error to say the least... (Hell of a pain to get that back cover back on the light housing though)

Originally Posted by e90sexion

just ouf of curiosity,
are you guys able to make conversion kit for OEM xenon headlight for halogen headlight?
like for plug and play kit.

I do not think that OEM xenon can be retrofitted for halogen plug and play. The OEM xenons need not only ballasts but they need special computers as well as the light housing units plus a complete computer remap of the lighting... it is a very expensive option and you need quite a few parts and needless to say a flash from the BMW dealer to update.

As of now this is the only option below OEM that looks good and is affordable.

Oh and in terms of the warranty with BMW? How will replacing the headlights affect it?

When will this be updated for a go on buying?

[Satalite]

Oh and a DIY complete install guide would be great. I have never done this work before..

[Sarracino89]

Search the forum for bmw warranty and the law. BMW cannot void your warranty simply because you choose different headlights, however they will not repair or cover the new headlights under warranty.
It is illegal for them to void your warranty for such.

A diy will be posted once we get a LA customer to get them installed. We will contact our depo supplier monday for order so feel free to pm us (it should be working now) with the exact specs you would like and we will go from there. have a great Saturday everyone!

[Satalite]

Will this light be one single plug?

[Sarracino89]

Originally Posted by Satalite

Will this light be one single plug?

It will plug into the stock connectors.

Let me get back to you AW128 on the 4k.

[Satalite]

Originally Posted by Sarracino89

It will plug into the stock connectors.

Sorry to harras you with questions... the stock connectors meaning that there is one main connection cord that powers the lights? I believe I looked at it the other day with that "city light" thing and there was just one big (pin connector) in the rear.

Are there any other connections I am unaware of? After trying to install another aftermarket headlight on my younger brothers car today it had the main connection plus another small connector supposedly to plug into the parking light connector, but there wasn't a spot for that...

[Sam@JLC]

Originally Posted by Satalite

Sorry to harras you with questions... the stock connectors meaning that there is one main connection cord that powers the lights? I believe I looked at it the other day with that "city light" thing and there was just one big (pin connector) in the rear.

Are there any other connections I am unaware of? After trying to install another aftermarket headlight on my younger brothers car today it had the main connection plus another small connector supposedly to plug into the parking light connector, but there wasn't a spot for that...

No worries, like I say, more questions=more clarity.

I believe that it plugs into the two stock connections from the car. Let me get back to you on that tomorrow morning to make sure though.