**********s l Evolution Racewerks Front End Widebody Kit *BLACK FRIDAY KILLER DEALS*

[ModBargains.com]

Looking for the ultimate exterior upgrade for your 1-Series coupe?

[IMG]http://www.**********s.com/images/Products/EvolutionRacewerks/135i_Widebody/656_ER_135i.jpg[/IMG]


The Evolution Racewerks Front End Widebody Kit is sure to turn heads, and increase the handling potential of your vehicle exponentially. The widebody kit is 2.5" wider than stock on each side, for a total of 5" of increased track width, easily accommodating 10" wide wheels up front. No body modifications are required to install the widebody making this kit 100% reversible. The Evolution Racewerks Widebody kit is available three materials; fiberglass (FRP), wet carbon fiber, and ultra-lightweight dry vacuum carbon fiber.

Apart from improving the appearance of your 1-Series the widebody kit will also allow for improved handling. Through testing and development on Evolution Racewerk's own racecar they discovered the 135i had a tendency to oversteer when pushed to the limit. They determined the cause of this to be the small stock tires on the front of the vehicle (215/40/18). To solve these handling issues on their racecar they built the widebody kit. Running a square wheel setup (18x10" wheels all-around with 285/30/18 tires) the car now exhibits neutral handling characteristics, with understeer virtually eliminated. Evoultion Racewerks noted that with the main issue of the traction up front taken care of modifications to the suspension such as thicker sway bars, spring/shock stiffness were more drastic, allowing the car to show its true handling potential.

[IMG]http://www.**********s.com/images/Products/EvolutionRacewerks/135i_Widebody/CF_Small1.jpg[/IMG] [IMG]http://www.**********s.com/images/Products/EvolutionRacewerks/135i_Widebody/CF_Small2.jpg[/IMG] [IMG]http://www.**********s.com/images/Products/EvolutionRacewerks/135i_Widebody/CF_Small3.jpg[/IMG]

Many will ask, why is there only a wide body kit for front available. The main reason is simply for function over appearance. By increasing the width of the rear a bigger wheel and tire setup would be needed, this in turn would decrease the handling capabilities of the vehicle. At the moment Evolution Racewerk's racecar has 400 horsepower, and currently has enough rear traction to handle that power.

Key Features

• 2.5" wider fenders on each side (5" wider total)
• Allows for 10" wide wheels up front (10.5" max)
• Includes 5 pieces (Front bumper, 2 front fenders, 2 side skirts)
• Available in 3 materials
• Compression type plug molds used for production
• Includes all hardware needed
• 100% reversible
• Does NOT alter the factory panels
• Allows for improved handling

Black Friday Pricing:

• **********s Instant Rebate: - Spend $400+ and receive $40 off Instantly!
• Widebody fiberglass: $200 off - $1755.95
• Widebody CF (wet): $200 off - $2255.95
• Widebody CF (dry): $300 off - $3155.95

Please feel free to give me a call at ************** ext 8006 email me at Alan************.com

[IMG]http://www.**********s.com/images/Products/EvolutionRacewerks/135i_Widebody/Dry_CF_17.jpg[/IMG]