|
|
|
12-27-2023, 09:55 PM | #23 |
Lieutenant
300
Rep 429
Posts |
|
Appreciate
0
|
12-28-2023, 03:43 AM | #25 |
Enlisted Member
32
Rep 39
Posts |
Quick comparison of the OEM oil cooler vs the do88 cooler.
|
Appreciate
2
tracer bullet2416.00 ShocknAwe3234.00 |
12-29-2023, 06:21 AM | #26 |
Enlisted Member
32
Rep 39
Posts |
Jewelry...
|
Appreciate
2
Grimm569833.00 thisisluka15.50 |
01-16-2024, 11:56 AM | #28 | |
H O O N
86
Rep 694
Posts |
Quote:
The V2 shafts were actually manufactured by YFCM for YCW/MFactory, YCW no longer offers the V2 shaft due to a falling out between the two companies. Their latest is the V3 however IMO they're inferior as it lacks the YFCM patented interlocking flange, has lower grade finishes, and have quality issues as detailed in several threads on M3post. YFCM V2 shaft is still available, if you google "YFCM E82" it'll come up.
__________________
U WOT M8? |
|
Appreciate
2
tracer bullet2416.00 changster31.50 |
01-16-2024, 07:26 PM | #29 | |
Enlisted Member
32
Rep 39
Posts |
Quote:
In the meantime I'm getting the chassis setup now and want to get a bunch of seat time before moving on. |
|
Appreciate
0
|
03-24-2024, 04:02 AM | #30 |
Enlisted Member
32
Rep 39
Posts |
I haven't updated this build thread in a while.
Installation is all done and now it's just about seat time. It's only seen spirited mountain and coastal twisties so far and will hit the track asap. With the basic track day type mods I've put on so far, the car weighs 1433kg with a full tank of gas and no driver. |
Appreciate
0
|
03-24-2024, 04:16 AM | #32 |
Enlisted Member
32
Rep 39
Posts |
The ride height and alignment was set on the E88 wheels. When putting the taller OEM wheels back on for the street the rear wheels gets quite tucked. However, there's actually no rubbing issues.
|
Appreciate
0
|
04-12-2024, 07:18 AM | #34 |
Enlisted Member
32
Rep 39
Posts |
XClutch single organic vs OEM:
|
Appreciate
1
tracer bullet2416.00 |
Post Reply |
Bookmarks |
|
|