|
|
|
01-23-2018, 09:55 AM | #3 |
Lieutenant
425
Rep 545
Posts |
Looks like the specs are as follows:
Front 18x8 ET30 Rear 18x9 ET41 Should clear the brakes, but will likely poke out of the front fenders a bit. ET30 is like running a 19mm spacer on the stock front wheels. Rears might be ok on a stock height car, but would probably rub the fender on lowered cars
__________________
2011 BMW 135i ///M-Sport, DCT
Bilstein B12 kit, Dinan camber plates, M3 front control arms, Whiteline poly RSFB, MHD Stage 1, cp-e Charge Pipe, H&R Front sway bar, BMW performance diffuser |
Appreciate
1
Poptarts13.00 |
Post Reply |
Bookmarks |
|
|