Sponsored by The Tire Rack

[Beasted]

Here are the wheels I'm looking to buy.

http://www.ebay.co.uk/ulk/itm/221791804317

Question is will I have enough clearance on everything, arches, calipers etc.

Probably use 275,30,19 tyres on the rear and 245,30,19 on the fronts

[Eyeman]

Nope, the offset need to be in the 40s or 50s, especially with wheels that wide, those are listed 35 and 38 offset. Some of those into the stretched/cambered look might make them fit by running 215fr 235r tires and 4 deg of camber.

[Beasted]

Originally Posted by Eyeman

Nope, the offset need to be in the 40s or 50s, especially with wheels that wide, those are listed 35 and 38 offset. Some of those into the stretched/cambered look might make them fit by running 215fr 235r tires and 4 deg of camber.

Damn it really wanted them too. I know nothing about camber.

I'm saving at the moment for a full 1m kit so I need wide wheels to fit the arches etc. But in the mean time want them on as standard as my current wheels need to be sold to fund the new.

[Beasted]

Calculations on these are as follows

This is the new wheel difference

Front width + 26.7mm

Rear width + 33.1mm

Front -1.3mm further from suspension strut

Rear + 5.6mm closer to suspension strut

[VMRWheels]

Those are going to be very aggressive on a 1er. You want something closer to 8.5 ET45 in the front and 9.5 ET45-50 in the rear.

[Beasted]

Well if the plan goes ahead now, the complete 1m body kit is going on, so hopefully they will line up ok with that