Reverse Logic Jack Pad Tool bundle with new style lug bolt guide tool

[Fred@ReverseLogic]

Reverse Logic recently introduced a new series of 2024 aluminum lug bolt guide tools with a non-abrasive straight knurl. 2024 aluminum is stronger than the 6061 aluminum used in our earlier tools and most competitive tools. Our latest bundle offer combines one of the new lug bolt guide tools with our Multi-vehicle MV52-30-19 jack pad tool for $29.95 including shipping to destinations in the USA.

The aluminum block on the MV52-30-19 jack pad tool measures 52mm long by 30mm wide by 19mm high. These dimensions allow this tool to be used with cars that have an integrated vehicle jack pocket in the factory jack points. This includes all modern BMWs, MINIs, some non-AMG Mercedes, and the Nissan GT-R. A low profile floor jack is normally required to use this tool.

This jack pad tool is intended to be used with a floor jack with a flat bottomed saddle that is at least 3-inches in diameter. The lug bolt guide tool is available in three thread sizes, M12x1.5, M14x1.5, and M14x1.25. Both the jack pad tool and lug bolt guide tools are made in the USA.

The lug bolt guide tool shown in the photo has an M14x1.5 thread size. The E82 and E88 chassis require the M12x1.5 tool which is the default selection at this link:

http://www.reverselogic.us/shop.html...65&id=34804794