**********s | AMS Performance FMIC *Great Gains, Great Price!*

[modbargains]

Hey Bimmerpost,

**********s is proud to present

AMS Performance Front Mount Intercooler for the 135i and 335i

[IMG]http://www.**********s.com/images/Products/AMS/tn_AMS_bmw_fmic.jpg[/IMG]

Expect to see gains of 10 wheel horsepower gains, and up to 40+ wheel horsepower near redlining for cars that are running an increased boost due to tuning.

[IMG]http://www.**********s.com/images/Products/AMS/AMS_BMW_335i_Front_Mount_Intercooler_500x375.jpg[/IMG][IMG]http://www.**********s.com/images/Products/AMS/AMS_BMW_335i_Front_Mount_Intercooler_Closeup_500x3 75.jpg[/IMG]

AMS BMW 135i / 335i Front Mount Intercooler

The stock intercooler is a fraction of the size compared to the AMS FMIC and does not provide your car with its cooling needs. Your stock intercooler simply does not have the ability to cool enough air, this can lead to loss of power, and an increase in turbo lag.

This AMS system is the best performance bolt on that you can buy. Expect to see gains of 10 wheel horsepower gains, and up to 40+ wheel horsepower near redlining for cars that are running an increased boost due to tuning. This intercooler has over 49% more internal flow area than its stock counterpart, works with the stock piping and only requires small trimming to the plastic bumper support.

Exclusive Features:

• Over 49% more internal flow area than stock
• Smooth flowing cast end tanks allow for better airflow over the competitions sheet metal tanks
• Best performing intercooler on the market and requires less bumper support
• trimming than the competition.
• Industry first 3” inlet and outlet end tank ports
• Custom molded silicone couplers to optimize airflow volume and velocity.
• Will bolt up to your stock piping or most aftermarket pipe kits that are designed for the stock intercooler.
• Bar and plate style core, the best performing on the market
• All AMS intercoolers are pressure tested after assembly to 50 psi

Specifications:

• Intercooler core dimension: 6" tall, 20" wide and 6" thick
• Good for up to 550whp
• Comes with the Black "AMS" Painted Logo (optional)
• Slight trimming of plastic bumper support required
• Silicone couplers designed to be used with stock and most aftermarket piping.
• Hose clamps
• Weighs 17.6 lbs.

Applications:

• BMW 335i, 335xi, 135i Both Automatic and 6mt.
• Fits all USDM, and European Models

[IMG]http://www.**********s.com/images/Products/AMS/mini-mini-BMW_Dyno_Chart.jpg[/IMG]

This FMIC should be a no brainer for you guys get started with some instant improvement in your cars performance.

Any questions or comments call me at (714) 582-3330 ext 8009 or email Kevin************.com

Kevin