Thinking of 10inch rear wheel, deep dish and 18 or may 19.. need HELP!!

[UR25IO]

Hey guys

I have a 135i DCT M-SPORT with the M-suspension.. Im thinking of getting some spare wheels for Track and Drag use. and the occasion STREET.
I just want to put these wheels on without modify my camber/suspension/rolled guards.. ect

Ive been Looking at the SSR professor SP3.. Ive already know what i want for the fronts
225/40/18 with an 8 or and 8.5 stretch tyres

but need Help with the 10inch wide rear wheel rolling on 18'' Fat Dish
Im thinking 245/30/18.

What would be the ideal offset and dish without mods??

Cheers

[cooler2442]

Deep dish and our cars don't mix. You will have to roll your fenders to get it to fit if not more.

These are the only professors someone has put on our car:

http://www.1addicts.com/forums/showthread.php?t=548535

And he said the rubbing was so bad he could smell rubber. He is lowered but you would rub even at stock height most likely.

[UR25IO]

awww damm that sucks.. i was thinking something similar to that M3 pic i posted up..

did you know how wide are his wheels and offset..??

the specs of the wheel size that i want is pretty much same as sock just wider...

[UR25IO]

cooler2442 sorry mate, i just asked a dum question lol
i was looking at the photo and not at the wheel size that he posted

[Stuart@BMRAutowerkes]

whats the point of getting the wheels for drag/track use when you would have to stretch a 245... compared to a regular 9.5 ET50 rear where you can run a 265 or there is a special 9.5 ET62 rear that allows you to run a 265 with minimal fuss

[MrBlonde]

You can fit a 10" rear wheel but it requires a custom wheel build. You'd put a 285/30 R18 on it.

[Alpine*]

1M rear quarters, job done.

[Stuart@BMRAutowerkes]

^ this....

[Taymaishu]

I would run seventeens for the track.

God forbid why you want nineteen deep dish for track use.