|
|
|
12-12-2017, 10:02 AM | #1 |
Private
12
Rep 85
Posts |
BMW performance bumper
hey guys
so i'm planning to buy a performance bumper my car is a 125i that is a non m sport if anyone has experience of this please let me know so the conundrum is the performance bumper is made for the m sport bumper and has a hole to house the headlight washers also the my car has foglights while the performance bumper does not have a opening for the fogs, so what should i do to avoid getting error codes? i know i can pay a body shop to deal with this mess but i enjoy the DIY and hope someone can provide me with some guidance! |
12-12-2017, 01:43 PM | #2 |
Captain
67
Rep 853
Posts |
If you don't have xenons you can get the bumper without the washer cutouts.
The undertray will not fit properly but you can work around it. You can just unplug the fogs, they won't throw an error from memory. |
Appreciate
0
|
12-12-2017, 05:15 PM | #3 | |
Private
12
Rep 85
Posts |
Quote:
i found a great deal on a used bumper that match my paint so its off a 135 with a washer cutout, i'm planning to just find a cover from a wreck yard do you mind elaborating how the undertray wont fit and what i should do to work around it? thanks mate |
|
Appreciate
0
|
12-12-2017, 06:01 PM | #4 |
Captain
67
Rep 853
Posts |
From memory, the covers from an msport bumper won't fit properly on a performance bumper.
The standard non-Msport undertray cannot be screwed into the perf bumper, however you can make your own drill holes and screw it in place - it just wont be an oem like fit |
Appreciate
0
|
12-12-2017, 07:10 PM | #5 | |
Private
12
Rep 85
Posts |
Quote:
u mind if i ask u a few questions if i encounter any problems during the installation? |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|