|
|
|
09-18-2012, 08:35 PM | #1 |
Second Lieutenant
39
Rep 219
Posts |
Laguna Seca Video and Mods Review
I tracked my N55 135i for the first time this weekend, and it performed better than I expected. Having run prior track days in an Exige, the weight of the 135i is immediately apparent, but so is the comfort day-to-day. After this event, I'm convinced that this car can serve effectively as a dual-purpose vehicle.
Mods: BMW Performance Power Kit (PPK1) Toyo R888s BMW Performance Suspension M3 Front Control Arm Kit (includes control arms, wish bones, sway bar, springs, struts) M3 Rear Subframe Bushings Forge Motorsport FMIC Ferodo DS2500 Pads + 600*F brake fluid 100 octane gas This was my best lap, even though I flubbed turn 11 (the last one). 1:50:99sec. The power was sufficient, but the most impressive aspect of this vehicle on the track was the braking power. Absolutely zero fade, and tremendous stopping power. I'd say it stops better than the stock brakes on my Exige. Really, really strong braking capability. I don't know how much of this is attributable to the pads, the fluid, or the beefy stock caliper/disk setup, but I can say with confidence that this combination works well. Since the event, I noticed that the brakes do make a LOT of noise on the street. I never did a full bedding procedure prior to track day, so that may help. Otherwise, I may throw the stockers back on till the next event. I got the intercooler to discourage overheating. We had very mild ambient temps in the low 70's and high 60's, so it may not have been an issue anyway. But I'm happy to have the FMIC regardless. Before/after dyno runs showed a nice little bump in HP and area under the curve in torque from installing the Forge unit. The suspension is as stiff as I'd want a daily driver to be. It's not too low for even the largest speed bumps, and not too jarring to take on long trips either. For me, it's the Goldilocks "just right" balance for street and track. Happy to field any questions. Scott |
09-18-2012, 09:56 PM | #2 |
First Lieutenant
22
Rep 380
Posts
Drives: 2012 135i
Join Date: Jun 2012
Location: Sacramento
|
You mentioned the brakes not fading, do you have the BMW performance brake kit w/slotted and cross drilled rotors or just the stock setup? Also were you using a vbox to record the video and track data?
|
Appreciate
0
|
09-18-2012, 09:59 PM | #3 | |
Second Lieutenant
39
Rep 219
Posts |
Quote:
I used Harry's Lap Timer via my iPhone + external GPS device + OBD connection to pipe in throttle position, engine speed, etc. Love this combo. |
|
Appreciate
0
|
09-18-2012, 11:55 PM | #4 |
Major
49
Rep 1,072
Posts
Drives: 12' 135i
Join Date: Feb 2011
Location: San Jose, California
|
you get to go on with a certain group?
I would give my left nut to get back on that track one more time!! Nice run!!!!
__________________
Matthew Gallop: '12 N55 Mods: JB4 Flex ISO | iCarbon DP | VRSF 5" FMIC | BMS Intake | ER Charge Pipe | Race Axleback | ST Coils | Alufelgen CS7's | iCarbon 3 fin Diffuser | Blackline LCI | CarbonFiber Spoiler | Orion v4 AE's | 30% tint | red+blk roundels | Cyba Scoops | H-Style front Lip | WeissLicht LED Smoked Sidemarkers | Matte Grills | Coded | |
Appreciate
0
|
09-19-2012, 09:04 PM | #5 |
Second Lieutenant
39
Rep 219
Posts |
|
Appreciate
0
|
09-22-2012, 07:12 AM | #6 |
Colonel
140
Rep 2,234
Posts |
that's a solid time! nice job! laguna seca is on my bucket list. hopefully I'll visit one of my friends in the bay area soon but won't be able to do it with my car have to get a rental or a loaner. I've had nothing but good experience with the brakes also but not everyone shares our sentiment. I use to run the Ferodo pads last year. they are great pads. how you liking the R888? what size are you running? I am running the RA1's. very sticky but hard to find the size I want
__________________
"I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"
|
Appreciate
0
|
09-22-2012, 11:15 AM | #7 | |
Second Lieutenant
39
Rep 219
Posts |
Quote:
R888's are as follows: 255/35/18 (rear) 225/40/18 (front) I used R888's on my Lotus and they performed great, so decided to throw a set on this car. On the track they perform as expected -- sticky and predictable. On the street my only complaint is that they're pretty loud. I think it's mostly the rears, but there's quite a bit of road noise which is most apparent at low speed. These tires are my dedicated set for the track, so this is a non-issue for me. RFTs go right back on when the car transforms back into a daily driver. The pads are still pretty noisy for my taste (I prefer silence, if you couldn't tell), so the stockers may go back on soon too. |
|
Appreciate
0
|
09-22-2012, 11:30 AM | #8 |
Colonel
140
Rep 2,234
Posts |
renting a lotus wouldn't suck if you want to try another set of daily pads that have great modulation feel, no dust, no noise you should try the cool carbons. they have a solid reputation among the members here. also it would be great if you could get a little more rubber up front. if you don't want to go to full blown camber plates you should try pulling the alignment pin, add the M3 lower control arm and maybe add the dinan fixed camber plates. you should be able to run a 235 up front with these mods. cheers,
__________________
"I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"
|
Appreciate
0
|
09-22-2012, 11:41 AM | #9 | |
Second Lieutenant
39
Rep 219
Posts |
Quote:
M3 control arms = done (along with some other M3 suspension bits) I'm going to burn up these tires and pads before tossing them, but thank you for the suggestions. |
|
Appreciate
0
|
09-27-2012, 11:24 PM | #10 |
Supreme Allied Commander
3842
Rep 54,352
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
The time the OP is running should have not overworked the brakes. If he were to run into the 1:47 or lower range, then he will really need to be getting on those binders and the stock brakes will not likely to hold up, not even with the DS2500, but stepping up Ferodo DS1.11, Hawk DTC or PFC 01, 06 or 08 would be okay.
|
Appreciate
0
|
09-28-2012, 10:11 AM | #11 |
Colonel
37
Rep 2,084
Posts |
FFS is this guy 10 years old? If he ever grows up, someone let me know.
In the meantime, here's a tutorial on forum tools that might help. |
Appreciate
0
|
09-28-2012, 11:40 AM | #12 |
Colonel
140
Rep 2,234
Posts |
what a douche! I had no idea we could do this. doing it right now. thanks Gary
__________________
"I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|