ECS Cross drilled & Slotted GEOMET rotors

[BimmerE82]

Love these new ECS rotors behind my VMR701's Installed some BOSCH Quietcast premium brake pads as well!

[dojk]

Nice, any pics of the front?

[BimmerE82]

Fronts are on order.....Still rocking the OEM Blanks until they arrive.

[bazil769]

Hey how are they holding up? Any squeaks? How was the bedding in? Any Rust? I am looking at these:

https://www.ecstuning.com/b-ecs-part...54998slgmtlra/

https://www.ecstuning.com/b-ecs-part...78051sltgmlra/

[BimmerE82]

Originally Posted by bazil769

Hey how are they holding up? Any squeaks? How was the bedding in? Any Rust? I am looking at these:

https://www.ecstuning.com/b-ecs-part...54998slgmtlra/

https://www.ecstuning.com/b-ecs-part...78051sltgmlra/

I've had these for some time now with absolutely zero issues.

[Jorgensen54]

Originally Posted by BimmerE82

I've had these for some time now with absolutely zero issues.

Are they very dusty? My OEMs are driving me crazy because they squeal within one day of collecting dust.

[BimmerE82]

Originally Posted by Jorgensen54

Are they very dusty? My OEMs are driving me crazy because they squeal within one day of collecting dust.

Nope, I use the Bosch Quiet Cast pads and they work great for me with no dust.

[bazil769]

Originally Posted by BimmerE82

I've had these for some time now with absolutely zero issues.

Thank you. I am using EBC yellow stuff..they're amazing, less dust and initial bite seems better than oem.

[annalisa_ferri]

The Geomet rears are ok, they can withstand track abuse and are quite resistant to corrosion. Definitely thumbs up for ECS for those.
Unfortunately, I cannot say the same for their fronts, as I had a poor experience: cracks everywhere after just a couple of light track days (and I have cooling ducts...), and abundant rusting. Not to say that I noticed after they were already on that holes have different patterns on right and left (probably the two where coming from different lots). Read this old post:

http://www.1addicts.com/forums/showthread.php?t=777984

[BimmerE82]

Originally Posted by annalisa_ferri

The Geomet rears are ok, they can withstand track abuse and are quite resistant to corrosion. Definitely thumbs up for ECS for those.
Unfortunately, I cannot say the same for their fronts, as I had a poor experience: cracks everywhere after just a couple of light track days (and I have cooling ducts...), and abundant rusting. Not to say that I noticed after they were already on that holes have different patterns on right and left (probably the two where coming from different lots). Read this old post:

http://www.1addicts.com/forums/showthread.php?t=777984

Good to know, I have StopTech cross drilled and slotted in the fronts and they are performing well. I don't track my car though so I can't speak for how they would perform under those extreme conditions?