|
|
|
10-09-2010, 07:18 PM | #1 |
Private First Class
11
Rep 105
Posts |
Baseline HP & TQ and with these mods?
Did some research here and saw someone post 273 HP on stock 135i which is only about a 9% drivetrain loss. What's the range?
With an AFE intake and a Burger Tuning JB+ with about 12psi what will now be my crank HP and torque and how much to the wheels? |
10-10-2010, 09:15 PM | #3 |
First Lieutenant
48
Rep 320
Posts |
I kno this guy that dyno his 135i today and he had 09 135i w/ JB+ (100%) and Berk Axle Back Exhaust
Results: HP = 302.88whp TQ = 338.16
__________________
Current- 2009 M-Sport 135i
SOLD-2008 135i(Jb4-15ohm-FSB)map 3 @ 19psi, Active Autowerke Charge Pipe with Dual meth nozzle cm5 & cm10, Active Autowerke Intercooler, AFE Intakes, Active Autowerke DP with RR Catback exhaust and KW V2 coilover. |
Appreciate
0
|
10-11-2010, 08:10 AM | #4 | |
Lieutenant
29
Rep 586
Posts |
Quote:
So there's gotta be a couple more HP in my car but after seeing Alex450whp pull there is no doubt that I have to get some DPs.
__________________
2009 135i Black on Black
Options|Leather| Sport Package| Premium Stereo| Steering Assist | V1 Engine MODS| JB4 install | AR DPs | Berk Axleback | ITG Filter | BHS OCC | Exterior Bling| Kerscher splitter | Interior Bling | Bimmian pedals | 3P Cars gauage | |
|
Appreciate
0
|
10-11-2010, 11:26 AM | #5 |
First Lieutenant
48
Rep 320
Posts |
[QUOTE=BahamaBart;8140414]That would be me Unfortunately my gauge lost the max boost read when they turned off my car but I've been seeing 12.8 lbs. lately. I figured it was the new software from the dealer when I had my HPFP replaced. When I got home, I found out that the dealer had reversed the solenoid bypass (recommended by Burger) and with it and the JB+ at 100% I was seeing 13.7 lb readings. Sneaky little dealer
So there's gotta be a couple more HP in my car but after seeing Alex450whp pull there is no doubt that I have to get some DPs.[/QUOTE When you put on DPs and midpipes your gonna feel sooooooo much torq its not even gonna be funny lol
__________________
Current- 2009 M-Sport 135i
SOLD-2008 135i(Jb4-15ohm-FSB)map 3 @ 19psi, Active Autowerke Charge Pipe with Dual meth nozzle cm5 & cm10, Active Autowerke Intercooler, AFE Intakes, Active Autowerke DP with RR Catback exhaust and KW V2 coilover. |
Appreciate
0
|
10-11-2010, 12:31 PM | #6 |
Lieutenant
48
Rep 546
Posts |
It's really tough to get a good estimate on what your specific car will put down. For example, my car with just a drop-in filter and SSTT (the equivalent to JB+ at about 60%) put down 328whp and 338 lb/ft of torque at the wheels. This was on a dynojet, about 80 degrees, and typical florida humidity.
__________________
Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(1addicts.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
|
Appreciate
0
|
10-14-2010, 04:39 PM | #7 |
Brigadier General
167
Rep 3,160
Posts |
Looks like OP is looking for some more power! If anything consider the JB3 instead. We all know what that's capable of and regardless of what you do, I'll set you up on Bimmerpost pricing!
The **********s 135i has the JB3 and AFE intake. Kevin |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|