|
|
|
02-12-2014, 05:32 AM | #1 |
But your honour it's my Affluenza I swear!
57
Rep 533
Posts |
Any1 got electronic adjustable dampers?
Where did you put this button in the 135i or where have you seen it? (besides the cigarette lighter)
I was thinking of putting it next to the sport button but not sure if its possible.
__________________
135i M Sport DCT. BSM/Oyster/GP trim. FBO Cobb, Bilstein EDC coilovers, M3 bushings, PSS.
Knowledge of the Tapa Tapa Tapa street race start. Last edited by ItsHectic; 02-12-2014 at 08:00 AM.. Reason: resurrection! |
02-15-2014, 08:04 AM | #2 |
Enlisted Member
4
Rep 35
Posts |
Under the light switch
I found the easiest place was low under the headlight switch.
I have the KW DDC version. I had to take out a little bit of the hard foam behind the plastic. On the KW the button is lit up all the time, so i was glad I put it low. The angle makes it shine down. It is easy to reach and push instantly also. You will not regret the electronic shocks, i absolutely love them. Soft is a little too soft, but where i drive, on the street. A push of the button and it is great for the track. |
Appreciate
1
|
02-16-2014, 01:42 PM | #3 |
But your honour it's my Affluenza I swear!
57
Rep 533
Posts |
Thanks, I checked and that seems like a good spot except I dont think its an interior part that can be replaced?
It just occured to me that my car is missing a button for the fog lights I wonder if I could replace it with a 120i part and hook up the suspension to the fog light button. Looks like it would be a hard job http://c1552172.r72.cf0.rackcdn.com/23816_x600.jpg
__________________
135i M Sport DCT. BSM/Oyster/GP trim. FBO Cobb, Bilstein EDC coilovers, M3 bushings, PSS.
Knowledge of the Tapa Tapa Tapa street race start. Last edited by ItsHectic; 02-16-2014 at 01:59 PM.. |
Appreciate
0
|
02-17-2014, 08:02 AM | #4 |
Enlisted Member
4
Rep 35
Posts |
Could be, but I never had any thoughts about returning to stock.
It is too much work. Running all the wires throughout the car. Resealing the rubber grommets. If you mount it low enough and took it all out when you sell,no one would see it until a month after they bought it. I got tired of running the wires on installing, that's why I put it there. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|